Announcement

Collapse
No announcement yet.

locking bolts for stock manifolds

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • locking bolts for stock manifolds

    I am up to installing my exhaust and curious if anyone has any experience with Stage 8 locking bolts on stock manifolds. Are these worth it or are stock bolts with a simple lock washer just as good?

    I just rather do it the right way the first time and not worry about a leak down the line.

    Also, is there a torque sequence to use? I did find the torque spec to 33 ft/lbs but not sure if there is a specific order or just work from the inside out.
    This is my Syclone. There are many like it, but this one is mine. Without my Syclone I am nothing. Without me, my Syclone is nothing..............

  • #2
    i should also add that I already picked up some copper high temp rtv as well
    This is my Syclone. There are many like it, but this one is mine. Without my Syclone I am nothing. Without me, my Syclone is nothing..............

    Comment

    Working...
    X