Announcement

Collapse
No announcement yet.

Air to Air Intercooler How-To

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • #76
    Re: Air to Air Intercooler How-To

    Originally posted by Z SKI View Post
    Doesn't the entire system get filled with pressurized air??? If so, it would most likely flow through both???
    The only way to really tell is do a run, and use a temp gun and look at the temps on the inlet and outlet on both and see what you get. A better way is to remove the upper and see if your AITs even change. My money is that they don't.

    Comment


    • #77
      Originally posted by SY2932 View Post
      Re: Air to Air Intercooler How-To



      That's quite a difference. Should be no surprise that you will get detonation with an intercooler in non working order... Water conducts heat around 25 times more efficiently than air does. Even though it can be a pain with the plumbing and whatnot, my truck will always have a water to air intercooler.
      Like my Boat, Ty and former Alfa Romeo 75 (Milano) Turbo

      Comment

      Working...
      X