Fastest times on stock heads and internals?

SYCLONE#1531

SYCLONE#1531

'MOFOFAST
Whats the fastest times that have been posted with using the stock unmodified longblock? Is it possible to get a Sy in the high 10s with c16 race fuel, large injectors, 3000+ stall /upgraded 700 and a 70mm+ turbo / Big stuff 3 ?
 
Six-is-Enough

Six-is-Enough

Use to do a little Boost
Re: Fastest times on stock heads and internals?

SYCLONE#1531 said:
Whats the fastest times that have been posted with using the stock unmodified longblock? Is it possible to get a Sy in the high 10s with c16 race fuel, large injectors, 3000+ stall /upgraded 700 and a 70mm+ turbo / Big stuff 3 ?
Click to expand...

Search for Phil Long. He went 10.93 on stock long block+ some NOS. Also went a 11.10 without nos on stock long block.
 
Last edited:
Luke

Luke

Fish sticks SUCK !!!
Re: Fastest times on stock heads and internals?

nothing like giving a stang a killer start then spanking his a$$ :tup:
 
Norm

Norm

Donating Member
Re: Fastest times on stock heads and internals?

Luke said:
nothing like giving a stang a killer start then spanking his a$$ :tup:
Click to expand...

If you listen to the announcer, Bradshaw wins in the Mustang. Long loses by breaking out. Still a good run, he just went " too fast"
 
dgoodhue

dgoodhue

BuSTeD 4.3
Re: Fastest times on stock heads and internals?

R&C_RallySyTy said:
:rotf:

What size turbo was that 10.9 run on? That really is amazing on a stock long block.
Click to expand...

It's a PTE 52. If I remember right he tried a 67 and it went slower, he thought the stock heads didn't flow enough.
 
sy#2716

sy#2716

SyTy 4 Life
Re: Fastest times on stock heads and internals?

Yea when he pull the motor it looked brand new on the inside also. He said bearing looked great along with the pistons.

IIRC he was running 26-27 psi with c16 with a good bit of timing in the tune and the shot of nos was fairly small like a 45 shot or so.
 
You must log in or register to reply here.
Top