TYHOGG
Active member
If anyone has any ideas please let me know. I really need this thing running this weekend.
First off I have spark, and fuel in the rail. The truck will turn over all day with the starter, but won't start.
I have my ostrich plugged in. But have 2 questions:
1. how is the blank chip supposed to be installed on the memcal unit? I noticed that there is a little half circle indentation on one end of the chip. Does this mark get installed on the outside of the board or on the in-side near the middle.
2. when installing the memcal on the g1 adapter. are the pins on the g1 inserted on the blank chip side of the memcal or the other.
I installed turnerpro rt off the disk that came with my motes equipment. I then downloaded the latest XDF & ADS, from code59 and installed them in the tunerpro file as instructed. I then downloaded Dig's bin file for 60lbs, etc. I pluged into the ostrich and uploaded the bin. The progress bar at the bottom of the screen says the bin was loaded successfully. I try and start the truck and it turns over but doesn't try to start. I don't think the injectors are firing and the fuel isn't making it into the cylinders. I'm guessing i'm missing something uploading the bins correctly to get it to run. If anyone can let me know if i'm doing something wrong i would greatly appreciate the help.
Thanks in advance,
Adam
First off I have spark, and fuel in the rail. The truck will turn over all day with the starter, but won't start.
I have my ostrich plugged in. But have 2 questions:
1. how is the blank chip supposed to be installed on the memcal unit? I noticed that there is a little half circle indentation on one end of the chip. Does this mark get installed on the outside of the board or on the in-side near the middle.
2. when installing the memcal on the g1 adapter. are the pins on the g1 inserted on the blank chip side of the memcal or the other.
I installed turnerpro rt off the disk that came with my motes equipment. I then downloaded the latest XDF & ADS, from code59 and installed them in the tunerpro file as instructed. I then downloaded Dig's bin file for 60lbs, etc. I pluged into the ostrich and uploaded the bin. The progress bar at the bottom of the screen says the bin was loaded successfully. I try and start the truck and it turns over but doesn't try to start. I don't think the injectors are firing and the fuel isn't making it into the cylinders. I'm guessing i'm missing something uploading the bins correctly to get it to run. If anyone can let me know if i'm doing something wrong i would greatly appreciate the help.
Thanks in advance,
Adam
Last edited:
