LS-1 Front brake parts-PICS ADDED-

Foot Performance

Donating Member
prices from gm parts direct you can look the parts numbers up excet for the RT caliper they dont service it any more.

The shipping qoute from them was around 132.05(which I think is where they make there money)

RT Rotor 19171340---104.79
LT Rotor 19171339---104.79

RT Caliper 18046300---137.89
LT Caliper 18046299---137.89

RT Braket 18026163---71.76 stock un painted
LT Braket 18026163---71.76

Total 760.93

All parts are brand new GM . The rotors: one sat at my shop and build up some surface rust the other was in my car in box but still had a little rust on it. I put them on the brake lathe and took 95 % of it off with just scotch bright DID NOT TURN THEM they are still at new thickness

The calipers are the powder coated black ones from the anniversary trans am

The right rotor has been upside down on the bench and is scratched up only on the hub part not the

I have pics but dont know how to post them I can email them if you want or I may try and figure out how to post them later tonight :tup:

I paid way more than this as the calipers were unavalible from gm direct at the time they wew 230 somthing a piece

but I would do around 550 shipped(since I did let the rotor rust a little).
 
Last edited:

Foot Performance

Donating Member
Re: LS-1 Front brake parts

Re: LS-1 Front brake parts

I did forget to say that the rotors are drilled and slotted (GM performace rotors)
 

Foot Performance

Donating Member
Re: LS-1 Front brake parts

Re: LS-1 Front brake parts

photo1.jpg

photo4.jpg

photo3.jpg

photo2.jpg

photo.jpg
 
Last edited:

bezerk

New member
Re: LS-1 Front brake parts-PICS ADDED-

you bought these to put them on the Syclone? you don't have the cbr hardware do ya?
if these will fit a syty with the cbr hardware, can you do $550 shipped international? shippping would be about $60 i think
 

Foot Performance

Donating Member
Re: LS-1 Front brake parts-PICS ADDED-

you bought these to put them on the Syclone? you don't have the cbr hardware do ya?
if these will fit a syty with the cbr hardware, can you do $550 shipped international? shippping would be about $60 i think

I do have the hardware but I am going to use it to put wilwood stuff on my truck but they will fit the cbr f-body kit(which is what I bough them for) if I can get my parts guy to figure out how ship international I would do that I will do some digging and maybe talk to our ups guy today:tup:

shoot me a shipping address
 

Foot Performance

Donating Member
Re: LS-1 Front brake parts-PICS ADDED-

No go on the over seas shipping it was crazy expensive but I am still open to offers I need these to go
 
Top