Front LS1 brakes low miles

Mario65

Mario65

Hotrodicus Supersonicus
I have a complete front set, pads, factory rotors and calipers. 35k mile car and 2k mile brake job. 150.00 plus ship. Boxed and ready to go. Very nice shape and ready for a little detail work. You will need CBR's kit to install on a SYTY and they have their kits here: http://www.syty.net/forums/forumdisplay.php?f=65.

There is a good chance I will also have the CBR kit front stainless lines available also.
 
Mario65

Mario65

Hotrodicus Supersonicus
Re: Front LS1 brakes low miles

Mikel2000 said:
can u send a pic to justaskmike@gmail.com and what size rotors? will this fit stock rims?
Click to expand...


They are 12" rotors and they fit 16" and greater. Dont know for sure on the factory rims but someone should know if you ask around.

They will need clean up (wire brush and caliper paint) to look perfect they are very sound and fresh pads.

DSC02864.jpg

DSC02863.jpg

DSC02862.jpg

DSC02861.jpg

DSC02860.jpg
 
Last edited:
Mikel2000

Mikel2000

New member
Re: Front LS1 brakes low miles

Are you sure the rotors aren't 12"? I found this quote " rotors ls1 are 12" while the c5 are 13.4"? I plan on using my stock rims so i need a 12" rotor
 
Mario65

Mario65

Hotrodicus Supersonicus
Re: Front LS1 brakes low miles

Mike you are right I am dain brammaged.

the f-body rotors are 12"
the C5 and c6 std. rotors are 12.8"
the c6 z51 rotors are 13.4"
and the c6 z06 rotors are 14"

these fit stock 16" wheels. In fact I am sure that the biggest disc you can run with a 16" I noticed a stock z28 yesterday (16" rims) and the rotor and caliper looked like they took up all the room available.

I still have them.
 
You must log in or register to reply here.
Top