I found the article in the vault on this subject. And another with a video that doesnt work. Anyways the one in the vault doesnt say which fittings go where so i can do my own thing. I am going -8an pressure and -6an return. I got the fuel filter covered. I am wanting to know what fitting in need for the ends. Such as the fittings for ends on sending units and the ends of the engine. And i do have aftermarket billet fuel rail i bought used on here and want to use. Hope you guys can help!
Braided Fuel Line Help!!!
- Thread starter 92ty#178
- Start date
TYTILIDIE
METH HEAD
Re: Braided Fuel Line Help!!!
Go to RPM's site, he sells the adapters you need. He can also explain to you what it is you are doing. Just tell him what you are trying to to do and he can make a parts list for you.
Go to RPM's site, he sells the adapters you need. He can also explain to you what it is you are doing. Just tell him what you are trying to to do and he can make a parts list for you.
dutchty
Member
Re: Braided Fuel Line Help!!!
Just did mine all with an6.
under are all summit racing part #
tank is hmmm ... forgot..14 and 16 mm female adapters?? to an-
on stock rails engine pressure side EAR-991955ERL 16mm to an6 adapter and a EAR-809106ERL -6 90 DEGREE TUBE SWIVEL-SEAL
you also can use this kit for the fuel rail SUM-220009 1x 14mm and 1x 16mm to AN6 adapter
on fpr I used a 14mm elbow to AN6 (i did) or a banjo I couldn't find
on stock fuel filter 14 and 16mm to AN
if you want a external fuel pressure gauge ? I did put a fuel pressure adapter AN6 inline with pressure side with :
1x EAR-100192ERL -6 FUEL PRESSURE GA ADAPTER
2x EAR-981662ERL -6 TO 1/8 NPT ADAPTER
1x EAR-991001ERL 1/8 NPT COUPLING
1x SUM-800260 PRESSURE 0-60 MACHINE FACE LIQ 1/8
1x isolated clip to hold the gauge.
Just did mine all with an6.
under are all summit racing part #
tank is hmmm ... forgot..14 and 16 mm female adapters?? to an-
on stock rails engine pressure side EAR-991955ERL 16mm to an6 adapter and a EAR-809106ERL -6 90 DEGREE TUBE SWIVEL-SEAL
you also can use this kit for the fuel rail SUM-220009 1x 14mm and 1x 16mm to AN6 adapter
on fpr I used a 14mm elbow to AN6 (i did) or a banjo I couldn't find
on stock fuel filter 14 and 16mm to AN
if you want a external fuel pressure gauge ? I did put a fuel pressure adapter AN6 inline with pressure side with :
1x EAR-100192ERL -6 FUEL PRESSURE GA ADAPTER
2x EAR-981662ERL -6 TO 1/8 NPT ADAPTER
1x EAR-991001ERL 1/8 NPT COUPLING
1x SUM-800260 PRESSURE 0-60 MACHINE FACE LIQ 1/8
1x isolated clip to hold the gauge.