Ok guys I gotta sell my Ty I just got hit with the news my dog needs surgery and its gonna cost an arm and a nut so I gotta sell my Ty, plus times are tough right now and I need to pay some bills. I guess I am just trying to find out what its worth at the moment. It s a 92 with roughly 140K on the body, brand new motor maybe 1000 miles on it, with a waller 57mm turbo and polished wastegate. The upper IC and plemun are polished on the truck also. I have a walbro FP and adjustable FP regulator, Johnson IC pump, and a few other things in sure. Truck has 18in C6's front and back, gonna need new tires on them, but the rims are mint, I also have stock tires to go with it but they are all bent basically. Aftermarket deck and 2 pillar pod setup with boost guage only for now. Interior is very clean doesnt need much, exterior is gonna need a paintjob and a some body work. I have a piece of rear corner cladding but it is a fiberglass replacement, truck is going to need the passenger rocker cladding, but the rest is all there. I have a tailgate off a blazer for it the one on it has a big dent in it. I will try and get pics tomorrow but what is this roughly worth anyone know? Also have 4 brand new KYB monomax shocks and the truck is lowered 3in all around. The front shaft is out right now it needs a rebuild but I do have it, just didnt get to having it done. Please let me know I dont know what to ask for it.
Gotta sell my Ty
- Thread starter DRUNK411
- Start date
sy1907
SYCOTIC
typhooey
New member
Re: Gotta sell my Ty
as a LEO you mean you have very bad luck with cars and thats probably what would happen correct
as a LEO you mean you have very bad luck with cars and thats probably what would happen correct
92TYPHOON937
Active member
Re: Gotta sell my Ty
surgery for the dog??? i know u may be attached to it but surgury?? and have to sell the ty
surgery for the dog??? i know u may be attached to it but surgury?? and have to sell the ty
Re: Gotta sell my Ty
Sorry for the delay on responses but the dog ruptured a disc in her neck and needs surgery to repair it. The truck is in great shape from when I bought it, still needs some love, I forgot to mention that is has a brand new fuel tank, sending unit and straps, couple fuel lines recently repaired, also brand new brakes all around, all new wheel cylinders and drums and shoes and hardware in the back. I sold my caddy already trying to sell one of my quads also. Shit really hit the fan around here lately for me and I need to unload a bunch of stuff, don't want to but I have no choice. Also typeo the body had 194K on it not 140K
Heres some pics.
Sorry for the delay on responses but the dog ruptured a disc in her neck and needs surgery to repair it. The truck is in great shape from when I bought it, still needs some love, I forgot to mention that is has a brand new fuel tank, sending unit and straps, couple fuel lines recently repaired, also brand new brakes all around, all new wheel cylinders and drums and shoes and hardware in the back. I sold my caddy already trying to sell one of my quads also. Shit really hit the fan around here lately for me and I need to unload a bunch of stuff, don't want to but I have no choice. Also typeo the body had 194K on it not 140K
Heres some pics.
R&C_RallySyTy
Little Big Man
Re: Gotta sell my Ty
With 160k miles on the body does this mean the tranny also has 160k on it? This looks like one of those Tys with the good and bad. Low mile engine is always nice to have, needs some tender love and care. Paint, cladding, some other odds and ends. Could you send me a PM or just update your thread when you answer my questions. Speaking of questions, what motor is in it now. Is it another Ty motor or some other 4.3 motor? Stock other then the upgraded turbo? heads? ect...
With 160k miles on the body does this mean the tranny also has 160k on it? This looks like one of those Tys with the good and bad. Low mile engine is always nice to have, needs some tender love and care. Paint, cladding, some other odds and ends. Could you send me a PM or just update your thread when you answer my questions. Speaking of questions, what motor is in it now. Is it another Ty motor or some other 4.3 motor? Stock other then the upgraded turbo? heads? ect...
Re: Gotta sell my Ty
The trans was rebuilt on the truck at some point before I owned it, I have the reciept somewhere not sure exactly when it was done. It shifts fine though. The motor is the stock 4.3 that was in it just rebuilt I have all reciepts for it new everything, sent it out had it hot tanked freeze out plugs, crank miced, cam beerings, new rings the whole nine. Everything else is stock I just put the waller turbo on it because I felt the turbo should be redone, when the motor was done. You are correct all she needs is a little TLC which I was planning on doing, next big thing I was going to do was a paintjob and body work, but that is not happening now with it. She is a good truck other than that I hate to see it go but times are really rough right now so I have to do what I have to do.
The trans was rebuilt on the truck at some point before I owned it, I have the reciept somewhere not sure exactly when it was done. It shifts fine though. The motor is the stock 4.3 that was in it just rebuilt I have all reciepts for it new everything, sent it out had it hot tanked freeze out plugs, crank miced, cam beerings, new rings the whole nine. Everything else is stock I just put the waller turbo on it because I felt the turbo should be redone, when the motor was done. You are correct all she needs is a little TLC which I was planning on doing, next big thing I was going to do was a paintjob and body work, but that is not happening now with it. She is a good truck other than that I hate to see it go but times are really rough right now so I have to do what I have to do.
R&C_RallySyTy
Little Big Man
Re: Gotta sell my Ty
What are you looking to get for it? I'm interested.
What are you looking to get for it? I'm interested.
hatrik8
Donating Member
powercat6
Active member
hatrik8
Donating Member
powercat6
Active member
Re: Gotta sell my Ty
Price on ad is $6500.
1992 GMC Typhoon - $6500 (Danbury, CT)
Date: 2009-07-20, 10:21PM EDT
Reply to: sale-gbmda-1280489656@craigslist.org [Errors when replying to ads?]
It s a 92 with roughly 190K on the body, brand new motor maybe 1000 miles on it, with a waller 57mm turbo and polished wastegate. The upper IC and plemun are polished on the truck also. Truck has a brand new fuel tank, straps, sending unit and walbro FP and adjustable FP regulator, Johnson IC pump, and a few other things in sure. I did new plugs, wires, cap, rotor, fuel filter, 160 deg thermostat and some other stuff on it when I did the motor. Truck has 18in Corvette C6 rims front and back, gonna need new tires on them, but the rims are mint, I also have stock tires to go with it but they are all bent basically. Aftermarket deck and 2 pillar pod setup with boost guage only for now. Interior is very clean doesnt need much, exterior is gonna need a paintjob and a some body work. I have a piece of rear corner cladding but it is a fiberglass replacement, truck is going to need the passenger rocker cladding, but the rest is all there. I have a tailgate off a blazer for it the one on it has a big dent in it. Also have 4 brand new KYB monomax shocks and the truck is lowered 3in all around. The front shaft is out right now it needs a rebuild but I do have it, just didnt get to having it done. The truck has brand new ceramic front pads with crossed drilled rotors, and brand new rear shoes, wheel cylinder, drums and hardware. I am sure I am missing more that I cant think of right now. I have more pics I can email to anyone who is interested just shoot me an email.
Price on ad is $6500.
1992 GMC Typhoon - $6500 (Danbury, CT)
Date: 2009-07-20, 10:21PM EDT
Reply to: sale-gbmda-1280489656@craigslist.org [Errors when replying to ads?]
It s a 92 with roughly 190K on the body, brand new motor maybe 1000 miles on it, with a waller 57mm turbo and polished wastegate. The upper IC and plemun are polished on the truck also. Truck has a brand new fuel tank, straps, sending unit and walbro FP and adjustable FP regulator, Johnson IC pump, and a few other things in sure. I did new plugs, wires, cap, rotor, fuel filter, 160 deg thermostat and some other stuff on it when I did the motor. Truck has 18in Corvette C6 rims front and back, gonna need new tires on them, but the rims are mint, I also have stock tires to go with it but they are all bent basically. Aftermarket deck and 2 pillar pod setup with boost guage only for now. Interior is very clean doesnt need much, exterior is gonna need a paintjob and a some body work. I have a piece of rear corner cladding but it is a fiberglass replacement, truck is going to need the passenger rocker cladding, but the rest is all there. I have a tailgate off a blazer for it the one on it has a big dent in it. Also have 4 brand new KYB monomax shocks and the truck is lowered 3in all around. The front shaft is out right now it needs a rebuild but I do have it, just didnt get to having it done. The truck has brand new ceramic front pads with crossed drilled rotors, and brand new rear shoes, wheel cylinder, drums and hardware. I am sure I am missing more that I cant think of right now. I have more pics I can email to anyone who is interested just shoot me an email.