northeastsyty.com

[BigBadSmoosh]

The server that the site was run on died today, I believe I have some extra parts at home to swap into it, but don't expect the site to be back up.. if I have the parts it'll be a day or two, if I don't it'll be time to put together a new server

just an FYI, as far as I can tell no data was lost, just going to be a pain in the ass to get the data on the server off of it.

 

[93 TY 2185]

Re: northeastsyty.com

The server that the site was run on died today, I believe I have some extra parts at home to swap into it, but don't expect the site to be back up.. if I have the parts it'll be a day or two, if I don't it'll be time to put together a new server

just an FYI, as far as I can tell no data was lost, just going to be a pain in the ass to get the data on the server off of it.

Eric, I have been spoiled with having the use of your server for so long.
Please send me some information on what I can do to help get it up and running again.
I have made a lot of posts with links to this server. It’s very frustrating to search old post with broken links.

PM me with how I can help.

 

[BigBadSmoosh]

Re: northeastsyty.com

Eric, I have been spoiled with having the use of your server for so long.
Please send me some information on what I can do to help get it up and running again.
I have made a lot of posts with links to this server. It’s very frustrating to search old post with broken links.

PM me with how I can help.

let me see if I have spare hardware, thats the first hurdle..

after that, who knows.. but thank you for the offer :tup:

 

[MikeRenz]

Re: northeastsyty.com

i just had to change the power supply on my server today...must be server-die time or some shit

 

[White97SVT]

Re: northeastsyty.com

yeah, it really is a great service that you guys provide for us and I am very thankful. Let us know if you need help.

 

[Raist103]

Re: northeastsyty.com

hey eric if you need some parts let me know i have some crap laying around.

 

[Flyin Ryan]

Re: northeastsyty.com

Eric,

Same here man If you need some hardware let me know

 

[SyTyJedi]

Re: northeastsyty.com

Let me know the machine model and parts you need, have some extra stuff as well.

 

[spooldup]

Re: northeastsyty.com

yea eric let me know if i can help in anyway.

 

[BigBadSmoosh]

Re: northeastsyty.com

for those of you that asked.. the hardware is as follows:

Abit VP6 motherboard
1 gig ecc sdram
2 80 gig hds in ide mirror raid
dual p3 933 cpus..

I'm hoping it was the memory or cpus that crapped out seeing as I have extras, if it was the motherboard i'll have to start ebaying for one.

I just want to get it back up and running and then i'll considering buying some newer hardware

thank you all for the offer, if anyone has an extra abit vp6 laying around, i'd gladly take it off of your hands

I probably won't make any progress until friday, was planning on working on it yesterday but i ended up having to work on the k2500 trying to get it ready for nats..

 

[spooldup]

Re: northeastsyty.com

i found these on ebay. I don't know much about hardware. Are these the kind you need?

http://cgi.ebay.com/Abit-VP6-MB-Mot...ryZ42005QQssPageNameZWDVWQQrdZ1QQcmdZViewItem


or


http://cgi.ebay.com/Abit-VP6-Mother...ryZ42005QQssPageNameZWDVWQQrdZ1QQcmdZViewItem


Lets get a pool together and put this server back together.

 

[BigBadSmoosh]

Re: northeastsyty.com

trust me i searched on ebay as well.. I'm hoping its not the motherboard, so I'm going to swap a few other parts first then if it is the motherboard i'll try to buy one off of ebay.

problem is, is that they have a defect, the capcitors swell and it causes the motherboards to shit the bed.. i already replaced the capcitors on this board and its not easy, so having to do it on one i buy from ebay isn't fun.

 

[93 TY 2185]

Re: northeastsyty.com

i already replaced the capcitors on this board and its not easy, so having to do it on one i buy from ebay isn't fun.

I'm very good at at this type of work. I have all of the equipment for everything from "Through Hole" to "Surface mount" parts. LMK

 

[GMCSyclone1]

Re: northeastsyty.com

i found these on ebay. I don't know much about hardware. Are these the kind you need?

http://cgi.ebay.com/Abit-VP6-MB-Mot...ryZ42005QQssPageNameZWDVWQQrdZ1QQcmdZViewItem


or


http://cgi.ebay.com/Abit-VP6-Mother...ryZ42005QQssPageNameZWDVWQQrdZ1QQcmdZViewItem


Lets get a pool together and put this server back together.

Thats a good idea I'd be more than happy to donate to get the server back up and running just let me know.

 

[BigBadSmoosh]

Re: northeastsyty.com

I'm very good at at this type of work. I have all of the equipment for everything from "Through Hole" to "Surface mount" parts. LMK

good to know, my soldering iron doesn't generate enough heat to do surface mount stuff, luckily at the time I worked at a place that did that kind of work and i just used one of the irons at work. :tup:

 

[BigBadSmoosh]

Re: northeastsyty.com

ok, bad power supply problem resolved..


i still suggest everyone backup their stuff, you never know when i will get fired or quit

 

[93 TY 2185]

Re: northeastsyty.com

ok, bad power supply problem resolved..


i still suggest everyone backup their stuff, you never know when i will get fired or quit

Nice!

 

[Raist103]

Re: northeastsyty.com

good deal

 

[Timbo]

Re: northeastsyty.com

Woohoo!!!