door cladding

[NecroWolf]

i just finished hanging my new door and was getting ready to drill the holes out for the cladding hanger clips and had a few questions. on the upper row, the round disc i measured the centerline of the holes to be 6 7/8 from the bottom edge of the door, does this sound right to anybody? and the lower holes i measure to be 1 5/16 from the bottom edge. now when i pulled my cladding i found one of the disc was crushed i should be good with just five disc instead of six right? just wanted to check before i go drilling holes in my nice rust free door

 

[Syborg Twin Turbo]

Re: door cladding

You should be fine just missing one of them

 

[NecroWolf]

Re: door cladding

thanks soon as it dries up it's going on

 

[PPI Typhoon]

Re: door cladding

if you need the disk, I have a few around I could shoot out to you if you'd like.

 

[NecroWolf]

Re: door cladding

appriciate it but i think i'll just go ahead and give it a shot w/ five, i don't see the sixth one being that important