where the hell do these go???

flyingoufer

New member
so i cant figure out where these 2 ports go? should they be capped off or connected to something. the second port is the yellow arrow.
352fc50.jpg


here is another pic zoomed out a little
46zdc1f.jpg


any help helps! thanks
 

RSpengler

Ghetto Fab Specialist.
Re: where the hell do these go???

The top barb should be capped off. The bottom barb is one of two barbs for coolant to flow through, the purpose of which was to warm the throttle body, but they were never hooked up from the factory on SyTy's. I guess they figured the turbo would heat up the intake fast enough. So you dont need to worry about the two barbs on the bottom of the Throttle Body.
-Rob
 

RSpengler

Ghetto Fab Specialist.
Re: where the hell do these go???

The top barb needs to be capped off. If you dont it will be a boost/vaccum leak and you will see your boost fall off at Wide Open Throttle.
-Rob
 

RSpengler

Ghetto Fab Specialist.
Re: where the hell do these go???

I'm glad your thrilled that you have a boost leak. lol. :turbo:
 

flyingoufer

New member
Re: where the hell do these go???

haha, yea. i felt like there was a leak somewhere. just wasnt sure if that was the problem. cause if you told me that if it wasnt capped off there wouldnt be any difference, then id have a big problem cause then i would have to start checking all the hoses for hairline cracks etc etc.
 

2kwik4u

Resident slow guy
Re: where the hell do these go???

flyingoufer said:
haha, yea. i felt like there was a leak somewhere. just wasnt sure if that was the problem. cause if you told me that if it wasnt capped off there wouldnt be any difference, then id have a big problem cause then i would have to start checking all the hoses for hairline cracks etc etc.

If they are stock hoses, you should replace them all anyway :D
 
Top