New best for Ty369 11.46@117.39

D

denny

Active member
Made one pass at Etown today with the new build , didn't get to make a second pass because I didn't have the "proper safety equiptment".

Props to RPM for the engine parts and heads, Hood for my chip.

I think I reach the 50lber limit, it was runing lean all tru the run.
 
JSM

JSM

Active member
Re: New best for Ty369 11.46@117.39

Nice times, guess time to add some safety equipment? You going to install a cage?
 
TurboJunk

TurboJunk

questionable
Re: New best for Ty369 11.46@117.39

WOW impressive... i have to take my motor out to address som issues but when it goes back ill have almost the sam setup, minus the alky, and FMIC. you got me thinking alot now...


nice run
 
D

denny

Active member
Re: New best for Ty369 11.46@117.39

JS Manufacturing said:
Nice times, guess time to add some safety equipment? You going to install a cage?
Click to expand...

Thanks, I don't want a roll cage, will think about it over the winter.
 
ViciousV6

ViciousV6

400HP/550FTLB
Re: New best for Ty369 11.46@117.39

denny said:
Made one pass at Etown today with the new build , didn't get to make a second pass because I didn't have the "proper safety equiptment".

Props to RPM for the engine parts and heads, Hood for my chip.

I think I reach the 50lber limit, it was runing lean all tru the run.
Click to expand...

How many lbs of boost are you running.

I will going to e-town most likely on Friday again!

Ralph
ViciousV6
 
sytyguy

sytyguy

Moderated User
Re: New best for Ty369 11.46@117.39

Denny....I feel like there is a ton more in that chip. I did nothing to boost control (wasn't sure if you even needed elec control), played it safe on the tunes, and was only able to do over-the-internet tuning, so, yeah....lots more in that chip.

Hood
 
ViciousV6

ViciousV6

400HP/550FTLB
Re: New best for Ty369 11.46@117.39

denny said:
I ran 3/4 tank 93, 2 gallons 116 with alky, the boost was not solid 19 to 23, spike to 25 once.


Here is a crappy video with no sound
http://www.youtube.com/watch?v=4_j23hTL934
Click to expand...

I just was there on Weds Night Got 2 runs 12.4 both passes on 13.5 lbs of boost. Had both starts with bad 60' times, pump gas passes, no alky kit yet. We have gone 11.9 couple weeks ago with 1.79 60". @ 113.

What was your 60' times Denny.
Also what turbo combo you running on that truck.

Thanks Ralph
ViciousV6
 
D

denny

Active member
Re: New best for Ty369 11.46@117.39

ViciousV6 said:
I just was there on Weds Night Got 2 runs 12.4 both passes on 13.5 lbs of boost. Had both starts with bad 60' times, pump gas passes, no alky kit yet. We have gone 11.9 couple weeks ago with 1.79 60". @ 113.

What was your 60' times Denny.
Also what turbo combo you running on that truck.

Thanks Ralph
ViciousV6
Click to expand...

My 60' was crappy too, 1.728 with nitto drag radial.
I have a PTE51 turbo/downpipe, 2800 stall tcs
 
12secondSY

12secondSY

Syty Killer :(
Re: New best for Ty369 11.46@117.39

I'm so damn anxious to get mine done now I cant stand it. My goal was fall but now it will have to be in the spring. Still wont have a tranny that holds, leaning toward a TH400 with a trans brake when the time comes though.

Nice times, thanks for giving me some motivation again :tup:
 
mrweelr

mrweelr

New member
Re: New best for Ty369 11.46@117.39

Wow, impressive times! I guess you got all your chip issues sorted out after all :tup: Glad to hear it's running like it should.
 
You must log in or register to reply here.
Top