Build is all done pics w datamaster file

MRKING

MRKING

New Parts for Old Trucks
Re: Build is all done pics

Re: Build is all done pics

Way to go !! Its nice to know what a bigger turbo and injectors would do for me . What rpm did you have your 2-step set at on the d6 ?
 
cloneman315

cloneman315

Active member
Re: Build is all done pics

Re: Build is all done pics

was on 3000 left first time at about 6 psi track was hooking i should of went up to 8 to 10 psi i think but then my problems started so bno biggie next time
 
C

CKEITH

Doghouse Member
Re: Build is all done pics

Re: Build is all done pics

cloneman315 said:
was on 3000 left first time at about 6 psi track was hooking i should of went up to 8 to 10 psi i think but then my problems started so bno biggie next time
Click to expand...


could have , should have , would have.... hell first time down the track since the build.....very impressive. a few more runs 10.50's.. all day long. :tup: :tup: :tup:
 
cloneman315

cloneman315

Active member
Re: Build is all done pics w datamaster file

i installed the lockup control box and locked the conveter up at about 90 and it put me down to about 4000 when it locked big difference
 
jimhrabe

jimhrabe

Donating Member
Re: Build is all done pics w datamaster file

Wow your Build looks awesome if you dont mind how much do you have in the build?
 
cloneman315

cloneman315

Active member
Re: Build is all done pics w datamaster file

a2a is a mccoy i bought used for 750 engine i have about 3000 dollars with eric at trubo time includes turbo ,trans line kit oil system ,msd and other things,enigne i have about i think 3000 with my builder and about 600 to mike lee for stock heads ,pistons rods ,i havhe 400 in powdercoating 80 bucks on misc bolts i think 2200 in the trans from walleri think the edelbrock pump was like 199 and billets msd from ed hess i think was 150 so,i would say about 10,000 in just the engine trans etc ,and i know i am missing stuff like radiaor ,hydroboost ,electric fans,injectors,batterey,hoses,
 
Deanzsyclone

Deanzsyclone

New member
Re: Build is all done pics w datamaster file

Hey Cloneman, can you tell me, on those valve cover breathers, are you leaking oil out of them at all?? Mine drip oil down the valve cover onto the ground. I'm thinking maybe to much oil in the pan. Oh yah.. that engine compartment looks sweet!
 
cloneman315

cloneman315

Active member
Re: Build is all done pics w datamaster file

dean the first set of breathers i had the same problem ,but these ones have a built in baffle that are cleanable,and they work very good and the most after a day at the track there is a little tiny inch long drip that i just wipe with a rag ot mutch at all
 
Deanzsyclone

Deanzsyclone

New member
Re: Build is all done pics w datamaster file

cloneman315 said:
dean the first set of breathers i had the same problem ,but these ones have a built in baffle that are cleanable,and they work very good and the most after a day at the track there is a little tiny inch long drip that i just wipe with a rag ot mutch at all
Click to expand...

hey that's great info, thanks. I'm still tweaking my setup so I haven't got to that issue, thanks for solving it for me.
 
vortecfiero

vortecfiero

New member
Re: Build is all done pics w datamaster file

awsum looking...

hey did you know that imageshack has an automatic thumbnail link generated
when you upload your pics? it also has one available when you go back to
find and hot link your pics as well

 
You must log in or register to reply here.
Top