Hooters NJ - December?

Hooters NJ - December?


  • Total voters
    24

ViciousV6

400HP/550FTLB
Re: Hooters NJ - December?

If anyone is looking for any parts or needs something let me know trying to clear out alot of stuff before winter! Great prices and i can bring with me to the meet.
1. Set of ZR-1 chrome replica wheels with BFG G-Force KD Tires and lugs $1,000.00 or B/O (money talks)
2. Competition Slide-a-link bars or may be a set of Cal-Tracs I think they are sold!!!!!
3. Water pump, stock lower intercooler, urethane motor mounts, high torque GM starter, couple of alternators 1. stock 100amp, and 1 powermaster 200amp both need to be rebuilt. (Raist103-starter)$30.00 & 2 beers
4. Factory gas tank(windowlicker) $40.00
5. aluminum radiator support replaces shroud(holds top of radiator)Sell 30.00 give me $20.00
6. 5in auto meter tach w/memory & internal shift light $250.00
7. stock ecm, engine wire harness, interior wire harness
8. power steering pump
9. complete A/C system compressor, lines, condensor, fire wall unit, heater core, and blower motor.
10. Energy suspension Front sway bar polyurethane bushing # 3.5186R (red) $20.00 (92ty1173)
11. orange turbo inlet hose $15.00
12. blade of death front intercooler scoop (Ryda) $20.00
13. Complete Passanger door,cladding, glass, mirror, all harness(no doorpanel) $150.00
***Also got a set of L35 Heads bare castings (make offer)****(92ty1173)$100.00
14. ATR Stainless Steel Headers & Crossover w/Jet Hot 2000 coating $ 1,000.00 (black Knight)
(i will be removing these next week from the truck as i have a new set from MPE Fab going on the truck)
15. Pair of 28"x10" x 16" Hoosier Slicks(raist103) $60.00

I am sure i have alot more things around so if you need something let me know and i will see if i have one.

Ralph
ViciousV6
 
Last edited:

Baythan

SY2TY2SY2TY
Re: Hooters NJ - December?

ViciousV6 said:
.
1. Set of ZR-1 chrome replica wheels with BFG G-Force KD Tires and lugs
2. Competition Slide-a-link bars or may be a set of Cal-Tracs
3. Water pump, stock lower intercooler, urethane motor mounts, high torque GM starter, couple of alternators 1. stock 100amp, and 1 powermaster 200amp both need to be rebuilt.
4. Factory gas tank
5. aluminum radiator support replaces shroud(holds top of radiator)
6. 5in auto meter tach w/memory & internal shift light
7. stock ecm, engine wire harness, interior wire harness
8. power steering pump
9. complete A/C system compressor, lines, condensor, fire wall unit, heater core, and blower motor.
10. Energy suspension Front sway bar polyurethane bushing # 3.5186R (red)
11. orange turbo inlet hose
12. blade of death front intercooler scoop

Just bring it all...Dennis will buy it all! :rotf:

Jeff, good to hear from you...I'll add you to the list. :tup:
 

exotickoncepts

N.A.S.T.E. Member
Re: Hooters NJ - December?

Raist103 said:
hey i think i just blew up one of your cars. did you build a wrx with a gt35r? i raced him about 3 weeks ago maybe a little longer and i thought he said he had it built from you.

if it was him "huff" maybe let him know my cam catback only z will give him a rematch if he thinks he will be quicker this time :)


Nope! sorry I didn't build a wrx!

Baythan, just kiddin about the sy comment, ty's are cool too!!
 

Raist103

Engine Killer, iPhone Killer, Lawnmower Killer
Re: Hooters NJ - December?

exotickoncepts said:
Nope! sorry I didn't build a wrx!

oh that sucks i was going to tell you to tell him to bring it again. oh well. he is running around using your name.


ralph $25 and a beer or 2 for the starter?
 

ViciousV6

400HP/550FTLB
Re: Hooters NJ - December?

Raist103 said:
exotickoncepts said:
Nope! sorry I didn't build a wrx!

oh that sucks i was going to tell you to tell him to bring it again. oh well. he is running around using your name.


ralph $25 and a beer or 2 for the starter?

How about $30.00 and beer or 2 it is a true GM part High Torque. It was only on my truck during McCoy motor which wqasn't that long maybe 1,000 miles if that.

Ralph
ViciousV6
 
Re: Hooters NJ - December?

I need a gas tank if the one you have is in good shape, Ralph. Did you ever end up putting the cal tracs on your truck? I remember you had the Competition bars on your truck when I was at your house earlier this year for a syty meet (I came on the black motorcycle). I was wondering if you could compare the 2 sets of bars, I may purchase the cal tracs from you as well, I will let you know as the time draws near.
 

ViciousV6

400HP/550FTLB
Re: Hooters NJ - December?

windowlicker said:
I need a gas tank if the one you have is in good shape, Ralph. Did you ever end up putting the cal tracs on your truck? I remember you had the Competition bars on your truck when I was at your house earlier this year for a syty meet (I came on the black motorcycle). I was wondering if you could compare the 2 sets of bars, I may purchase the cal tracs from you as well, I will let you know as the time draws near.

Yea i am still trying to sell either one. I have the cal-tracs on my truck right now but not really sure if there is any difference between the two bars. I have changed all my suspension around. The gas tank is in very good shape it is the original tank which ihave painted. The aftermarket one suck! I had such a hard time trying to fit the aftermarket one in my truck with 3 guys. If you want mine its yours for $40.00 bucks i can bring it with me.

Ralph
ViciousV6
 

Raist103

Engine Killer, iPhone Killer, Lawnmower Killer
Re: Hooters NJ - December?

ViciousV6 said:
Raist103 said:
How about $30.00 and beer or 2 it is a true GM part High Torque. It was only on my truck during McCoy motor which wqasn't that long maybe 1,000 miles if that.

Ralph
ViciousV6

sold.

i am being cheap since anything i put in now is all a waste since i am most likely selling it.
 

MikeRenz

not stock
Re: Hooters NJ - December?

nah...I'm in a sunday soccer league. So i'll be driving the short bu while you guys are slugging beers. :tup:
 

Ryda85

Senior Member
Re: Hooters NJ - December?

ViciousV6 said:
If anyone is looking for any parts or needs something let me know trying to clear out alot of stuff before winter! Great prices and i can bring with me to the meet.
1. Set of ZR-1 chrome replica wheels with BFG G-Force KD Tires and lugs
2. Competition Slide-a-link bars or may be a set of Cal-Tracs
3. Water pump, stock lower intercooler, urethane motor mounts, high torque GM starter, couple of alternators 1. stock 100amp, and 1 powermaster 200amp both need to be rebuilt.
4. Factory gas tank
5. aluminum radiator support replaces shroud(holds top of radiator)
6. 5in auto meter tach w/memory & internal shift light
7. stock ecm, engine wire harness, interior wire harness
8. power steering pump
9. complete A/C system compressor, lines, condensor, fire wall unit, heater core, and blower motor.
10. Energy suspension Front sway bar polyurethane bushing # 3.5186R (red)
11. orange turbo inlet hose
12. blade of death front intercooler scoop

I am sure i have alot more things around so if you need something let me know and i will see if i have one.

Ralph
ViciousV6



ralph....dibbs on the ic scoop....and are we meeting up to cruise down there together?
 

ViciousV6

400HP/550FTLB
Re: Hooters NJ - December?

Ryda85 said:
ralph....dibbs on the ic scoop....and are we meeting up to cruise down there together?

$20.00 bucks sound fair! Let me! THanks Ralph
 
Re: Hooters NJ - December?

ViciousV6 said:
Yea i am still trying to sell either one. I have the cal-tracs on my truck right now but not really sure if there is any difference between the two bars. I have changed all my suspension around. The gas tank is in very good shape it is the original tank which ihave painted. The aftermarket one suck! I had such a hard time trying to fit the aftermarket one in my truck with 3 guys. If you want mine its yours for $40.00 bucks i can bring it with me.

Ralph
ViciousV6

$40 sounds good to me! How much do you want for either set of bars? (assuming they are in comparable shape)
 

ViciousV6

400HP/550FTLB
Re: Hooters NJ - December?

windowlicker said:
$40 sounds good to me! How much do you want for either set of bars? (assuming they are in comparable shape)

Well i have someone interested who is suppose be sending me a check for the Comp Bars(not that i wanted to sell them) but they are the ones off the truck right now! The only thing they need is new spring eye bushing from moroso which i have the part numbers that they will need. So i was asking $250.00 shipped. If the sy guy doesn't take them.

Ralph
 

92 Ty 1173

Active member
Re: Hooters NJ - December?

.
10. Energy suspension Front sway bar polyurethane bushing # 3.5186R (red) $20.00

***Also got a set of L35 Heads bare castings (make offer)****



PM sent @ these two items.
 

ViciousV6

400HP/550FTLB
Re: Hooters NJ - December?

Also got a set of Headlights Hella's with H3 Lamps for brighter night vision!
Look similar to these lenses
100_1351.jpg

$ 30.00 for the set!
 
Top