Motor mount

[jjorgensen52]

I've been trying to find motor mounts for the GT. According to the GM parts book, 2wd and 4wd use the same mount. So, that said, with the stock frame pads can I use a regular small block motor mount (looking to keep it poly) like this?

 

[dhorsman2000]

Re: Motor mount

search for motor mounts and you should get all the info you need.... :tup:

 

[jjorgensen52]

Re: Motor mount

search for motor mounts and you should get all the info you need.... :tup:

problem is the GT is 2wd, so there is very little info on here about it. I don't know if I need to replace the frame pads or not (or where to get them) for the poly motor mounts ... everything I see is for dropping in a small block

 

[jjorgensen52]

Re: Motor mount

Apparently, after looking around, the 2.8l motor mounts are where it's at. But the 4.3 mounts that fit them cost $160 from Summit .... this is irritating

 

[jjorgensen52]

Re: Motor mount

After more searching, I found the right mount from energy suspension , pn 3.1141 ... except apparently no one has them :roll: ... going to see about getting some via Summit