Need 50# bin...please help

12secondSY

12secondSY

Syty Killer :(
I just got a burner, datamaster, and cables and chips in the mail. Im going to need a lot of help getting it completely figured out but I'd like to be able to drive my truck while I do. Can someone send me a program that will run in my truck to get me started? I have 50#ers, 415 cam, vortecs with 2.05 valves, waller stock turbo upgrade, rpm a-a, alky. Also, how do I actually load it onto the program and burn it into the chip. Forgive me for being so new at this, I'll have plenty of dumb questions to ask Im sure. Thanks :tup:

my email is mhardw3@yahoo.com if you have something you can send me to get me a starting point
 
Last edited:
sy#2921

sy#2921

BAMF
Re: Need 50# bin...please help

Hey,
I just sent you a newer version of my bin. Please read the email along with it
 
12secondSY

12secondSY

Syty Killer :(
Re: Need 50# bin...please help

Thanks again. How does a 44 turbo compare to the waller upgraded stocker? Im told mine will outflow a 20G but beyond that I dont know where it stands
 
sy#2921

sy#2921

BAMF
Re: Need 50# bin...please help

They are very close. Its not the PTE44 which is actually a bigger turbo. my turbo is from a GN with a syty housing.
 
12secondSY

12secondSY

Syty Killer :(
Re: Need 50# bin...please help

Boostedpimp said:
Any chance I could get that bin file as well? I have the rpm stage 1 turbo which is pretty close to both of yours. If so here's my email address rgburmeister@verizon.net
Click to expand...
Im at work right now but I will send you the ones that I have gotten. If I forget to(which Im good at) shoot me a pm tonight and remiond me.
 
12secondSY

12secondSY

Syty Killer :(
Re: Need 50# bin...please help

denny said:
I didn't get a reject, sending again.
Click to expand...
For some reason I got them from the other guys but not from you. Maybe its putting in in my bulk folder? I'll double check when I get home.
 
Flyin Ryan

Flyin Ryan

hated cuz he drives fords
Re: Need 50# bin...please help

Guys.. thanks alot for the emails really appreciate it.. looks like I have a few I can work with right off the bat
 
H

hq_

Relic
Re: Need 50# bin...please help

Hi everybody,

Would someone like to help me out please? I've been running ATR Strip chip with stock injectors (ATR "7th injector" setup, Crane cam, T04 900cfm turbo, 3" exhaust, a few additional tweaks here and there) and I'm planning to do everything properly now. Meaning 3bar MAP and 50lb injectors to replace the POS extra injector and controller, which has caused numerous problems over the years.

Yes, I'm planning to have a custom map made as soon as all parts are installed, but having a starting point of some sorts and a drivable truck until my trusty dyno operator has time to actually map the whole thing, would be great. Virtually any code that works with aforementioned parts will do fine.

My email address is hq (at) gt-r.com . Thanks in advance... ;)
 
Syclone'D916

Syclone'D916

Syclone Owner #2414
Re: Need 50# bin...please help

I'm looking for a bin for my Syclone to get started with Ostrich.I've looked everywhere.My SY has stock turbo,stock injectors, .030 over bore,Eagle rods,crane cam, and has stock heads.Just looking to get the program started.Thanks. shorety65@sbc.global.net
 
You must log in or register to reply here.
Top