remote filter lines
- Thread starter ty166
- Start date
Re: remote filter lines
-10
ty166 said:
-10
Syclone#892
Member
Re: remote filter lines
Part # 22-804 or 22-904, not sure if 8 feet is enough but it would get you really close.
http://www.cmfilters.com/remote.cfm#
I am setting up an account with Canton so if you would be willing to wait I might be able to save you a couple bucks. I did not order the kit I got just a canister filter and block adaptor and I'm making up some hydraulic hose style hoses for the lines.
Good luck with the truck any questions email me.
Part # 22-804 or 22-904, not sure if 8 feet is enough but it would get you really close.
http://www.cmfilters.com/remote.cfm#
I am setting up an account with Canton so if you would be willing to wait I might be able to save you a couple bucks. I did not order the kit I got just a canister filter and block adaptor and I'm making up some hydraulic hose style hoses for the lines.
Good luck with the truck any questions email me.
ghettosled
SYTY SUPERSTORE
Re: remote filter lines
8an is typically 1/2" ID so it moves quite a bit of fluid..
8an is typically 1/2" ID so it moves quite a bit of fluid..
smallchange
New member
Re: remote filter lines
just did mind lines on my ty. the lines i used were # 8 It took a wile to do but I figure it out. I f you have any Question about it e- mail me at panpor@aol.com. I'll be glad to help you out with part #
just did mind lines on my ty. the lines i used were # 8 It took a wile to do but I figure it out. I f you have any Question about it e- mail me at panpor@aol.com. I'll be glad to help you out with part #
ty166
Donating Member
Re: remote filter lines
i searched but couldnt find an answer for a question i have now. i tapped the adapter out to 3/8 npt and am going to run 10 an line to a remote filter mounted elsewhere and thru a small cooled and back to the adapter. i dont really want to try to figure it out by trial and error so i thought someone here has to know the answer. with the adapter mounted to the block is the fitting furthest from the block the outlet and the one closest the block the return or visa versa ?
i searched but couldnt find an answer for a question i have now. i tapped the adapter out to 3/8 npt and am going to run 10 an line to a remote filter mounted elsewhere and thru a small cooled and back to the adapter. i dont really want to try to figure it out by trial and error so i thought someone here has to know the answer. with the adapter mounted to the block is the fitting furthest from the block the outlet and the one closest the block the return or visa versa ?