Finally have some numbers for the new build

[Syclone0565]

Well, I went out tonight and got my first 0-60 numbers in my Sy. 3.35 sec

That was with a 5 PSI launch on street tires. I have TONS of tuning to do yet as I have a basic starter bin with only 2 revisions on the bin. I am heading to the track Wednesday evening and should have my camcorder mount done by then also.

With another couple weeks of tuning I should be able to get under 3 seconds to 60 on street tires on the street. :tup:

Later,
John

 

[MikeRenz]

Re: Finally have some numbers for the new build

sweet. keep us updated w/ your tuning process :tup:

 

[wantingasy]

Re: Finally have some numbers for the new build

DAYUM!!! That's moving. Good work :tup:

 

[SeattleSy#1255]

Re: Finally have some numbers for the new build

thats great, whats the build?

 

[Syclone0565]

Re: Finally have some numbers for the new build

thats great, whats the build?

L35's 2.02/1.6 Ported/Polished
TRW Pistons
Eagle H-Beam Rods
PT67S Dual Ball Bearing
Mototron 65# Injectors
ATR Down Pipe
G. Blake 4L80E Trans
TCI Trans Controller
JSM 4L80E Conversion Kit
JSM 90* Intake
90mm Accufab Throttle Body
Gilbert Prop Shaft
LS1 Brakes Front/Rear
Underdrive Pulleys
3 bar map
3" Bullet muffler
3" Exhaust
Custom Edelbrock Intake
422 Comp Cam
JSM Front Coil-overs
Q1-A Coil-overs w/600# springs
96 ZR-1's wheels
3200 stall
EGR Delete
K&N 1000CFM
255 Walbro pump
Fuel Cell (16gal)
Mallory billet AFPR
tial 38mm waste-gate
Custom front mount air-2-air (31x19x4)
Volvo Elec. Dual Fans
Auto-meter Ultra-lite Elec. FP Gauge
Auto-meter Ultra-lite Boost Gauge
Auto-meter Ultra-lite Trans Temp. Gauge
Innovative Multi Stage Boost Controller
Fully emulated tuning via laptop

I am sure there is more.

 

[bezerk]

Re: Finally have some numbers for the new build

nice truck, nice build, and dayum..that's hauling!

 

[AUSyTyIN]

Re: Finally have some numbers for the new build

:drool:

 

[badnewz]

Re: Finally have some numbers for the new build

Once you get under 3 sec. 0-60, your average joe has a hard time believing that when you tell them. I pulled a 2.2 0-60, messing around, on the street, w/ my Gtech. I told some guys I was golfing with when the topic of 0-60 times of performance cars came up. They gave me a big BS look when I told them what my truck did.

Mike B
St.Clair Shores, MI

 

[Nova67ss]

Re: Finally have some numbers for the new build

Hi there

Finaly U got your Sy running and all vibrations and small troubble is gone.. sweet taste of wictory now eh?

Thums up from me

 

[swoop]

Re: Finally have some numbers for the new build

thats a pretty stout build there...congrats on getting it running.

 

[Syclone0565]

Re: Finally have some numbers for the new build

Hi there

Finaly U got your Sy running and all vibrations and small troubble is gone.. sweet taste of wictory now eh?

Thums up from me

Thanks guys. Now to dial it in and get it under 3 seconds on the street.

John

 

[Maxtor]

Re: Finally have some numbers for the new build

Once you get under 3 sec. 0-60, your average joe has a hard time believing that when you tell them. I pulled a 2.2 0-60, messing around, on the street, w/ my Gtech. I told some guys I was golfing with when the topic of 0-60 times of performance cars came up. They gave me a big BS look when I told them what my truck did.

Mike B
St.Clair Shores, MI

I get the same looks all the time. I think it's because all the car mags make such a huge deal out of the exotics and other "fast" cars that run in the 3 sec range 0-60. They can't believe a GM S truck is actually faster LOL. Once they get a ride their tune quickly changes, though. I never get tired of looking at all the performance inspired cars that cost $100k+ that I can slaughter to at least 130mph.

 

[Six-is-Enough]

Re: Finally have some numbers for the new build

Just to update. John and John went a 7.29 @ 95 mph in the 1/8 before recieving the boot from the track. Did it with a 12 psi launch and 18 psi max boost. Truck still has a fairly rough code $59 tune in it and plenty left. Atleast it gives us some where to start from. This was with with 92 pump gas too!

I must give much respect to him cus he assembled the engine his self! No store bought power here!

BTW It went 0-60 in 2.8 seconds on the 7.29 run. I guess we will have to let him back into the JSM/FBI crew. GREAT JOB.:tup: I am sure he will be shooting for 10's next weekend at Hamilton, OH.

 

[Nova67ss]

Re: Finally have some numbers for the new build

Hi Jeremy and JOHN, Thats realy impressive, way to go, I hope U get the tune done and get that 10 sec run and more..

I´ll ceep my fingers crossed for ya, and Jeremy, U remember the chassie trix we discussed in kansas? try these with Johns Sy and se if it response as well as yours did, but dont be to gready about the launch boost then ;D

 

[Six-is-Enough]

Re: Finally have some numbers for the new build

Hi Jeremy and JOHN ("Will" ) Thats realy impressive, way to go, I hope U get the tune done and get that 10 sec run and more..

I´ll ceep my fingers crossed for ya, and Jeremy, U remember the chassie trix we discussed in kansas? try these with Johns Sy and se if it response as well as yours did, but dont be to gready about the launch boost then ;D

I can't give out all my secrets! He fast enoughas it is!:rotf:

 

[George Blake]

Re: Finally have some numbers for the new build

You better tell me at track day.....

0565's vibration had a lot to do with not prepping the converter before installing it. Pilot needs to be clean and the mount surfaces all need to be clean. Gotta clean and grease the receiving pilot on the back of the crank. Makes a big difference. Once the converter was prepped, 99% of the vibration went away. Whatever was left was in the engine. Had some little birdies keeping me up to date on the progress.

I love watching all these guys suffer from the "power robbing" 4L80e. Sub 3 second 0-60. Amazing.

Anything you want to know in 0565's trans, I'm willing to share. Just make sure it's OK with 0565 first.

 

[Nova67ss]

Re: Finally have some numbers for the new build

I can't give out all my secrets! He fast enoughas it is!:rotf:

Ok Jeremy, then I´ll not telling anyone to haha, but just ceep on testing on that trick and you´ll see the stocker is gona be better out´da hole...

 

[Syclone0565]

Re: Finally have some numbers for the new build

Not hiding any secrets here. Anything you wanna know, ask, if I don't know I am sure there is someone on here that can fill in the blanks.

Can't wait till next weekend

 

[alwayscode390]

Re: Finally have some numbers for the new build

Great looking truck....I am curious about your suspension mods ---

 

[Syclone0565]

Re: Finally have some numbers for the new build

Great looking truck....I am curious about your suspension mods ---

As of right now, all I have are Jeffs JSM coil-over kit on the front with 12-way adjustible QA1's. I still have not made up my mind of what I am going to do to the rear. Any idea's?

John