Pte Turbo's, Who Likes Em?

[NJ93TY]

Has Anyone Run A 52 Series Turbo With A 2800 Or 3000 Stall Convertor? If So How Do They Like It? I Am Looking To Use This Setup With The Rpm Air To Air Ic. The Products Are From Mccoy Motorsports.

 

[turbodig]

Re: Pte Turbo's, Who Likes Em?

Has Anyone Run A 52 Series Turbo With A 2800 Or 3000 Stall Convertor? If So How Do They Like It? I Am Looking To Use This Setup With The Rpm Air To Air Ic. The Products Are From Mccoy Motorsports.

See this link... it's pretty much the setup you're talking about. (In a Sy)

http://www.syty.net/forums/showthread.php?t=53691

There are many vendors here that will sell you that turbo/converter/etc. Have a look at the vendors section.

 

[Captain Morgan]

Re: Pte Turbo's, Who Likes Em?

I have a PTE-52 on my Typhoon, with a ProTorque 10.5" 3000 Stall converter. I dont really have any complaints.

 

[NJ93TY]

Re: Pte Turbo's, Who Likes Em?

I have a PTE-52 on my Typhoon, with a ProTorque 10.5" 3000 Stall converter. I dont really have any complaints.

Great, I think I am goign to take that route, thanks everyone!

 

[blk00z28]

Re: Pte Turbo's, Who Likes Em?

I had a PTE 60-1 on my truck with a 2800 stall and it was awesome. Took a little longer to spool, but once it did it was strong. By 3k it was at 1lb.

 

[Quickstop [UK]]

Re: Pte Turbo's, Who Likes Em?

are PTE still selling their kits?

 

[denny]

Re: Pte Turbo's, Who Likes Em?

are PTE still selling their kits?

Believe so, they are listed on their price list, search for 'syty'
http://www.precisionturbo.net/Pricesheet.pdf

but goto be a dealer to order from them, I think dealers get 15 or 20% off the listed price.

Denny

 

[SY2932]

Re: Pte Turbo's, Who Likes Em?

I am currently running a PTE PT-70 with a 3K stall with no complaints. While it is more turbo than I need to achieve my goals, after one ride in my bud's truck, I was hooked. It pulls like a freight train...

 

[Skyhighsami]

Re: Pte Turbo's, Who Likes Em?

I have a 51mm PTE what is the difference between the 52-51?

 

[ZMann]

Re: Pte Turbo's, Who Likes Em?

ONly issue i've had was a few snapped bolts due to the Swain coatings getting in between the turbo.... other than that.... mine makes alot of noise.

 

[ghettosled]

Re: Pte Turbo's, Who Likes Em?

they are not selling the downpipes anymore.

fyi, in order from smallest to largest it goes:

44
60
51
52
54
63
Stealth
67GTQ
67GTQH
70GTQH
71GTQH
72GTQH
74GTQH
76GTQH

 

[MySaudi]

Re: Pte Turbo's, Who Likes Em?

i'm looking into getting a new turbo over winter and i really want a nice fast spool.. but also one that has a good overall hp rating. i looked up on this. i'm not a big person on turbos but i would think this is a good one i will do more searching and tring to find out what size stall and everything i would need for this... has anyone ran this type or Size turbo?

Precision Turbo PT-67GTQ

Compresor Specs:
Inducer: 67mm
Wheel Inducer: 2.620"
Wheel Exducer: 3.310"
wheel trim: 63
inlet/outlet size:4"/2.5"
bearing system: 360 race

Turbine Specs:
A/R: .81
Wheel Inducer: 3.110"
Wheel Exducer: 2.675"
wheel trim: 70

 

[syclone1100]

Re: Pte Turbo's, Who Likes Em?

Myself Im running the 63, which is more that I will ever use, but at 3k it puts you back in the seat real quick... No complaints what so ever...