bolt in suspension limiters

[Slowcone]

anyone ever try these? i think they just replace you bumpstops.

http://store.summitracing.com/partdetail.asp?autofilter=1&part=CEE-2026&N=700+115&autoview=sku

 

[JSM]

Re: bolt in suspension limiters

Replacing the bumpstops won't work.

 

[cloneman315]

Re: bolt in suspension limiters

you can make your own for about 2 dollars

 

[Slowcone]

Re: bolt in suspension limiters

yea i saw the thread how to make them......i dont have access to a welder. is there a bolt on solution?

 

[cloneman315]

Re: bolt in suspension limiters

dont need a welder

 

[psmvchaser]

Re: bolt in suspension limiters

I have them on my Ty. Mine are adjustable, which is nice so I can extend them for the street and tighten them down at the track. I had them welded on.
It really limits the travel of the front end suspension so the front end does not raise up on launch. I have no front end traction issues now.....

 

[cloneman315]

Re: bolt in suspension limiters

them with caltracs is a great combo

 

[jpalmer]

Re: bolt in suspension limiters

what about limit straps? any one try that? they "hit" softer

 

[Slowcone]

Re: bolt in suspension limiters

Replacing the bumpstops won't work.

i meant use the existing hole

http://www.syty.net/forums/showthread.php?t=42936&highlight=front+end+limiters&page=2

post 16 and 17

 

[psmvchaser]

Re: bolt in suspension limiters

them with caltracs is a great combo

Thats exactly what I have and it works great.

 

[cloneman315]

Re: bolt in suspension limiters

1.4 to 1.5 60fts

 

[Slowcone]

Re: bolt in suspension limiters

do you thread the bolt all the way down so its touching the frame? or do you leave some space?.....i think this is the next mod along with my poor mans cal tracs (bump stop on over load spring)

 

[cloneman315]

Re: bolt in suspension limiters

you have to play with them so the truck launches and leaves straight etc i have mine so they just touch and back out a tiny bit

 

[blk00z28]

Re: bolt in suspension limiters

not to bring up a slightly dead post, but heres more info on them.
http://www.syty.net/forums/showthread.php?t=48520&highlight=Front+End+Limiters

You don't have to weld in the bolt. I did that just to make sure I never had to tighten them again in the future.