RPM Shop Clearance (Nov 08)

[ghettosled]

updated:

(1) Bowtie Oddfire Engine. Forged 3.4" stroke crank, Manley Billet Rods, 23 Deg JE pistons, etc

(1) Moldex Billet Evenfire Crank. 2 piece, 2.250" journal. $3000

(1) Set 4.030 JE Extreme Duty Pistons. For 3.75" Crank. Used but like new $300

(2) 57mm Turbonetics turbos. Stg5 turbine. T3 5 bolt housing. new $750

(3) 60-1 Turbonetics turbos. Ball Bearing. Stg 5 turbine. T3 5 bolt housing. New $995

(1) 4.125" bowtie block. Wet Sump. 4 Bolt Main. Freshly machined. $2750

(1) New Bowtie Block. Wet Sump, 4 Bolt Pro Gram Billet Caps. 388 Sportsman Casting. $3000 * sale pending *

(1) Set Typhoon Power Side Mirrors with Switch $90/ pr.

more to come ............

 

[Flint]

Re: RPM Shop Clearance (Nov 08)

(1) Set 4.030 JE Extreme Duty Pistons. For Stock Crank. Used but like new $300

++++++
Dibs. Give me payment info. Ship to 11230 NY.

If you have rings for these pistons(zero gap) LMK.
Thank you.

 

[ViciousV6]

Re: RPM Shop Clearance (Nov 08)

Mike i will take the new set of Eagle Rods, non machined.

Ralph
ViciousV6

Shipping to Toms River,NJ 08755

Let me know total bill and i can shoot you the paypal.

Thanks
Again

 

[SHADOWWHIT]

Re: RPM Shop Clearance (Nov 08)

Possible dibs on:

New Bowtie Block. Wet Sump, 4 Bolt Pro Gram Billet Caps. 388 Sportsman Casting.

Pm sent

 

[Don W.]

Re: RPM Shop Clearance (Nov 08)

Probable interest in the used rods if you can figure out how to make it 6. Got an extra, even if new, around? Ya I know, if you had an extra you'd put it in the pile. :roll: But if not where do I get the last one?

 

[MySaudi]

Re: RPM Shop Clearance (Nov 08)

Hey Mike

i am interested in the

(2) 57mm Turbonetics turbos. Stg5 turbine. T3 5 bolt housing. new $750

(3) 60-1 Turbonetics turbos. Ball Bearing. Stg 5 turbine. T3 5 bolt housing. New $995

i was wondering what the A/R Turbine is.. I believe stage 5 would be the .68 am i right?..

 

[turbodig]

Re: RPM Shop Clearance (Nov 08)

Probable interest in the used rods if you can figure out how to make it 6. Got an extra, even if new, around? Ya I know, if you had an extra you'd put it in the pile. :roll: But if not where do I get the last one?

There was a guy that posted pics of a severely blown up motor a couple days ago... had eagles in it.

The front half was destroyed, but there might be a good one in there...

 

[ghettosled]

Re: RPM Shop Clearance (Nov 08)

(1) Set 4.030 JE Extreme Duty Pistons. For Stock Crank. Used but like new $300

++++++
Dibs. Give me payment info. Ship to 11230 NY.

If you have rings for these pistons(zero gap) LMK.
Thank you.

i'm sorry the pistons are 4.020. I have pics to email if you can provide me with an email address.

 

[ghettosled]

Re: RPM Shop Clearance (Nov 08)

Probable interest in the used rods if you can figure out how to make it 6. Got an extra, even if new, around? Ya I know, if you had an extra you'd put it in the pile. :roll: But if not where do I get the last one?

I'll call eagle to see if i can buy a single rod. Otherwise i would check around or just post a wanted add for a single used rod..

 

[ghettosled]

Re: RPM Shop Clearance (Nov 08)

Hey Mike

i am interested in the

(2) 57mm Turbonetics turbos. Stg5 turbine. T3 5 bolt housing. new $750

(3) 60-1 Turbonetics turbos. Ball Bearing. Stg 5 turbine. T3 5 bolt housing. New $995

i was wondering what the A/R Turbine is.. I believe stage 5 would be the .68 am i right?..

I believe they are all .68 turbine wheel with .63 a/r turbine housings

 

[Don W.]

Re: RPM Shop Clearance (Nov 08)

LMK if Eagle can supply the 1 rod.

On the other idea, not sure if want a rod from an engine blown that bad.

 

[ViciousV6]

Re: RPM Shop Clearance (Nov 08)

Hey Mike,
Money Sent on the New Eagle Rods

Thanks
Ralph

 

[V]

Re: RPM Shop Clearance (Nov 08)

(1) 4.125" bowtie block. Wet Sump. 4 Bolt Main. Freshly machined. $2750

(1) New Bowtie Block. Wet Sump, 4 Bolt Pro Gram Billet Caps. 388 Sportsman Casting. $3000

Might be interested if SHADOWWHIT declines. Does this mean you're overstocked on bowties? Or maybe selling the last of your stock?

 

[ghettosled]

Re: RPM Shop Clearance (Nov 08)

Might be interested if SHADOWWHIT declines. Does this mean you're overstocked on bowties? Or maybe selling the last of your stock?

We are always searching so when we come across stuff we pass it on. Pretty sure shadowwhit is just waiting on me at this point.

FYI, if anyone needs a single eagle rod, i had to break up a set the other day so i have some loose rods.

 

[Don W.]

Re: RPM Shop Clearance (Nov 08)

I'm the guy that Mike broke the set for so I could have 6 rods (The 5 used and 1 new.) Great deal and a huge thank you to Mike for doing this. He didn't have to do it. :tup:

 

[SY2455]

Re: RPM Shop Clearance (Nov 08)

updated: (1) Set 4.030 JE Extreme Duty Pistons. For 3.75" Crank. Used but like new $300 ........

Mike, I know that you posted later on that the Pistons were 4.020, but what else can you tell me about them or are they gone?

 

[ghettosled]

Re: RPM Shop Clearance (Nov 08)

the pistons for stock stroke were 4.020 and they are gone. The pistons for the 3.75" stroke are 4.030 and i still have them. Both are extreme duty 8.5:1 pistons