Announcement

Collapse
No announcement yet.

User Profile

Collapse

Profile Sidebar

Collapse
dgoodhue
dgoodhue
BuSTeD 4.3
Last Activity: 11-08-2018, 09:56 AM
Joined: 02-09-2001
Location: Framingham, MA
  • Filter
  • Time
  • Show
  • Source
Clear All
new posts

  • dgoodhue
    replied to Why no twin scrolls?
    Twin scrolls are also suppose to have equal length headers and equal exhaust paths which would very difficult to do with our V6 set up. It may be worth the expense and extra work on a build with a bigger turbo that are typically require a bow tie build to take advantage of the air flow, but almost...
    See more | Go to post

    Leave a comment:


  • dgoodhue
    replied to Syclone 0644 1/8 dragstrip
    16psi will give you plenty of head room to turn up the boost. I ran my 11.9/7.6 with a 14psi (peak at 14.5 but the 3rd gear settled in at 14psi) but I don't have a built motor. I just have a junkyard balance shaft motor in my Syclone, so I haven't pushed it.

    Good luck at the track!...
    See more | Go to post

    Leave a comment:


  • dgoodhue
    replied to Syclone 0644 1/8 dragstrip
    Primwell? I have never heard of those tires. With the power you have you will likely be able to overpower any street tire, but you should be able to do better than that with a quality set of tires. (old tire also don't work well either). 30 Minutes gives your truck engine and more importantly transmission...
    See more | Go to post

    Leave a comment:


  • dgoodhue
    replied to Syclone 0644 1/8 dragstrip
    Good to see some SyTy racing, that 7.6 should be about a 11.9 1/4 mile.
    See more | Go to post

    Leave a comment:


  • dgoodhue
    replied to Sonoma GT Trans in a Syclone??
    The governor and shift points are different from a SGT.
    See more | Go to post

    Leave a comment:


  • dgoodhue
    replied to Sonoma GT Trans in a Syclone??
    I wouldn't spend my time converting it. You have to completely disable the transmission to swap the output shafts. A SyTy trans is basically a 4x4 transmission with the Corvette upgrades (Servo, TV boost valve and few other minor changes) and a unique separator plate and governor....
    See more | Go to post

    Leave a comment:


  • I can see the pictures. It looks like a good project. GLWS
    See more | Go to post

    Leave a comment:

No activity results to display
Show More
Working...
X