E
Reaction score
0

Profile posts Latest activity Postings About

  • Hi Eric, I am looking to purchase the TT velocity chip for my typhoon. My typhoon currently is tuned with code59 with the moates austrich emulator.
    The upgrades on my truck are:
    -walbro 255 and hotwire kit
    -billet adjustable FPR
    -high flow pump and upgraded hoses
    -kenne Bell CAI
    -EGR delete
    -silicone vac lines
    -full tune up wires/cap/plugs
    -plx wide band

    My question is if I upgrade to the Turbotweak chip can I order and use 60# injectors without having to do anything else? Also should I or do I need to order the scanmaster G gauge to make adjustments to the Velocity chip?
    Thank you for your knowledge.
    hey eric this a post I put up to see if I had missed something before I bothered you with a self inflecting problem lol. what you think?
    when I first start truck cold or hot it goes pig rich like low 10's afr basically flooding out, I clear it up for a few seconds and then it idles at a normal 14.5-15 afr. does this every time I start truck. The rest of the data master idle readings are,
    kpa-50, tps volts-.43, tps %1.2, iac-46, rpm-900, lterm-140, sterm-131.
    mods are vortec heads,e85, 80lb injectors, walbro pump,3 bar map, turbo tweak chip, sm cam, bigger throttle body, precision turbo, aem wide ban ran to f14.
    anything I should look for before I waste erics time at turbo tweak?
    it would also go pig rich when I put it in gear so I adjusted the idle fuel knob on the chip itself and cleaned that up a bunch and only drops to low 12's in gear now but did not affect the starting rich condition
    how you doing eric I have one of your chips in my typhoon it is set up for all stock with the exception of 3bar map I am upgrading my cam, lifters, timing chain, and stock turbo replacement compressor wheel from sportsmachine and 50lbs injectors cam specs are 194/204@407/429 how much to upgrade, time frame, and mailing instructions thanks cisco
    Hey man I just order parts from you and wondering how long it take to me? My name is John Metteer
    Hey. I had some questions for you. Currently putting my truck together and wondering if a chip would be beneficial for me. I dont know the first thing about chips/tuning so i apologize. My set up is relatively stock.
    Turbo-bmw wheel and ported, forge wastegate
    3" downpipe then 3" all the way back
    Adjustable fpr
    Racetronix 255 pump
    Sportmachines lower intercooler
    Otherwise i think im pretty much stock.
    Would i benefit from a chip. Should i upgrade injectors or no need for that. Would like to work with you on whatever i do.
    Oh i just ordered a 3 bar map from you as well
  • Loading…
  • Loading…
  • Loading…
Top