Recent content by aznturboman

Re: 808 cruise - Memorial Day 2015 I can make it

Re: Last 808 cruise of 2014 I should be able to make it.

Re: WTB exhaust bracket for cat to midpipe bump. If anyone has one please lmk

Re: WTB exhaust bracket for cat to midpipe If anyone has the cat to midpipe exhaust bracket lmk. Still need it

Hello everyone, I need the exhaust bracket that is between the cat and the midpipe. lmk if you have one and price for the bracket plus shipping to Hawaii. 96816 Thanks, aznturboman

Re: Running lean in idle okay guys so I got the idle to be good again but idk how this worked. So I went out to start the typhoon today to see if the problem still persist and today I noticed that the exhaust smelled rich but for some reason the gauge was still reading 17+. So I thought what...

Re: Running lean in idle Truck mods Kenne bell A2A RPM's 3 in exhaust w/ no cat. afpr ram intake NGK ur6 gapped .030-.032 forge motosport WG Velosyty chip for stock injectors Scanmaster from Turbo Tweak I'll check my plugs tomorrow to see if they are fouled. Should I make the gap smaller?

Howdy everyone, So today I was going to drive my typhoon but when I started it today it revved to almost 2000 RPM and then went down to around 1000 but at the same time my stock o2 and wideband was showing lean conditions around 17+ I have checked all my vacuum lines and couldn't find a leak...

Re: WTB mounting cups, front fender cladding bracket and rear corner bracket Ill wait for him to respond then but I do need both front fender cladding brackets from someone else so anyone please lmk if you have

Re: WTB mounting cups, front fender cladding bracket and rear corner bracket I did contact him and he said he has both rear corner mounting brackets and some mounting cups but not the front fender brackets. Then he said he was going to check how many mounting cups he has and that's the last I...

WTB all mounting cups needed for a typhoon, driver and passenger front fender cladding bracket and both driver and passenger rear corner cladding bracket. If anyone has these items please message me with pics of what you have and what it would cost plus shipping to Hawaii (96816) Thanks...

Re: no brake light on dash I pulled the cluster today and turned out it was the bulb. Bought a new bulb and put everything back together. Now I have a brake light in my cluster again. Thank you everyone for the input

Re: no brake light on dash Okay so I see the switch above the e brake pedal but how do you adjust it? It seems to be in a very small area and I can't get my hands in there. Or is do I have to remove the whole dash to get at it?

Hello people, So yesterday I jumped into my typhoon and I noticed that my brake light for the emergency brake doesn't light up anymore. I push the e-brake and released at least 4 times to make sure it really isn't working and nothing happened. I then looked at my fuses and saw the brake fuse...

Re: Fuel gauge not working properly found out it was my gauge cluster. It ended up working perfect for a after market fuel gauge. ended up buying another cluster and works perfect now