Recent content by jakeb1388

Re: Holiday Cladding sale! how much for GT bed corner cladding on both sides behind the tires?

Re: sonoma gt starting issue finally got around to fixing my noma this weekend, i removed the upper intake and found the lower had puddles of gas in the bottom so i soaked it uo and cycled the key on. turns out the pressure line to the injector had some small cracks in it where it is crimped on...

Re: sonoma gt starting issue the pump is priming, when i cycle the key on you can here it running. thanks for the help guys, i will try to get it pulled in this afternoon and check it out

im having a starting issue with my gt,after it sits for longer than 10-15 minutes i have to mash the accelerator pedal to the floor and crank for about 15 seconds before it will start, then i can smell a strong odor of fuel which tells me its probably flooding out at least one cylinder like if a...

Re: ignition problem... no offense, but i dont owe you anything, but i do thank you and the others for yalls help and input, it is very much appriciated. now its time to start collecting the rest of the parts to convert it over for the turbo set

Re: ignition problem... got my truck running about 1am this morning, checked fuel pressure after replacing the fuel pump and was only getting 15psi, checked lines for restrictions and found none. ended up the idiots at the parts store gave me a fuel pump for a TBI engine instead of the CPI...

Re: sonoma gt cladding thanks for the help guys

Re: sonoma gt cladding im in west texas

looking for the bed corner cladding for both sides for my gt. anyone have some they will oart with or know of somewhere i can get some? thanks in advance

Re: ignition problem... calm down there buddy, the pump wasnt coming on in the first place but i fixed that now i am getting fuel to the rail, you are right i havent verified pressure yet because my gauge was at work and after working a 10 hour day then working 5 more hours on my sonoma i...

Re: ignition problem... so i got to dig into my truck this after noon, was going to check spark, removed #1 plug wire from plug, and the little clamp that snaps on the plug stayed on the plug, so i replaced the wire, spark is good, checked power to pump, getting battery voltage to pump but pump...

Re: ignition problem... im not sure if it is an ignition problem. he just barley dropped the truck off to me last night so i havent even had a chance to really take a look at it. he told me when it dies everything stays on, radio gauge lights ect... he said he recently replaced the fuel pump...

Re: ignition problem... he said he replaced the coil, wires, plugs and cap i think, it all looks new. im thinking its a gotta be a short somewhere seeing as how its intermitent

i just bout a 92 sonoma gt with 83k. the guy says it will run for a few weeks and then die and not start for a few days then it will run for a week or so and happen again. he said he narrowed it down to an ignition problem. said its loosing spark between the coil and plugs. he replaced the pick...

Re: turboing my blazer, fuel delivery??? whats an afpr? and which chip would you recomend?