Recent content by piercedjd

honestly I don't think you really need them..........of course I can only speak from 2wd experience, but my truck is lowered with 2" spindles, and 1" springs and comes nowhere near hitting the bumpstops even during extremes, like hitting the unfortunate pothole etc.... maybe 2wd bumpstops would...

how long are the new ones exactly? you should only need maybe 2"s of bump stop for it to do what it needs to do..... ( prevent metal from contacting metal during extreme suspension compression ). 1/8" is nowhere near enough suspension travel. your truck will ride like total ass if it only has...

going too stiff on the rear shocks may cause you alot of wheelspin. a softer rear shock allows the axle to load up, causing you to grab more traction ( There are a number of reasons for this, but that's the simple version ). If you go too stiff, rather than loading the axle, you are more likely...

maybe a stupid question, but you did use the proper tool to remove the pulley from the old pump and istall it on the new one right? \ might want to mic the shaft of the new pump and make sure it hasn't been ground down to far to clean it up.

grab the oldest stock paint 4x4 you can buy, leave the cladding off, leave the body and paint stock, and swap everything underneath it and enjoy your sleeper status. :D

same size, but once you get into adapter plates to make things fit.......... I guess it all comes down to what it's worth to you. I just think there are easier ways to make good power. As far as grand nationals running 8's and 9's, while they are out there, they are not the norm. there are a...

from my experience it's usually better (I.E. cheaper) to stick with what's known to work. the amount of money spent in fabricating parts to make things fit and work properly when doing something like this is usually pretty high. you could spend the same money and get better results going an...

that's for the spare tire on a normal s-series. that's where you put the jack handle to lower the spare. http://catalog.mar-k.com/mar-k/mk-catalog.nsf/CustomerProductViewTest/B05592096ECF129586256A5B007A7303 tailgate handle relocator kit for a reasonable price. they also sell skins there to...

how can you get ahold of him? I assume he just changes the gears to the fast ratio gears?