Recent content by roadkill748

  1. roadkill748

    Project 9sec Typhoon For Sale Cheap!!!!!!!

    Re: Project 9sec Typhoon For Sale Cheap!!!!!!! sorry for the late reply i started a new job and been real busy heads are stock casting with larger valves,springs,and guides its a stock 2 bolt block bored with arp everything it has coilovers in the rear and stock front its never been on a scale
  2. roadkill748

    Project 9sec Typhoon For Sale Cheap!!!!!!!

    Re: Project 9sec Typhoon For Sale Cheap!!!!!!! got layed off before i could find out has alot of good parts to do it just need a tune
  3. roadkill748

    Project 9sec Typhoon For Sale Cheap!!!!!!!

    Re: Project 9sec Typhoon For Sale Cheap!!!!!!! now on ebay
  4. roadkill748

    Project 9sec Typhoon For Sale Cheap!!!!!!!

    Well I Got Layed Off And Have Fallen On Some Hard Times So My Baby Is Up For Sale 92 Typhoon 1992 GMC Typhoon Turbonetics T76GTS Turbo Snow Performance Meth Kit NX Wet Kit Dimond Custom Pistons Eagle H Beam Rods Comp Cams Custom Cam 83 Pound Injectors 2 255 Fuel Pumps With Voltage Booster ATI...
  5. roadkill748

    2008 syty homecoming

    Re: 2008 syty homecoming ill be going for the 1st time
  6. roadkill748

    LS1 Coil Setup - RUNNING!

    Re: LS1 Coil Setup - RUNNING! any new info on this?
  7. roadkill748

    Typhoon Went On The Dyno Today

    Re: Typhoon Went On The Dyno Today HP was way down because of no timing and afr was 9.1 at the top of the run so it was only around 300hp
  8. roadkill748

    Typhoon Went On The Dyno Today

    Re: Typhoon Went On The Dyno Today turbo is not a BB turbo and i did not turn the truck off from run to run truck stays around 170 degrees i plan on going to a true -4 with whatever restrictor turbonetics tells me to use im not even sure it was an oil problem i could have just got a bad turbo
  9. roadkill748

    Typhoon Went On The Dyno Today

    Re: Typhoon Went On The Dyno Today yes truck has a water to air setup inside the truck works great and as far as the turbo goes from day one its been a little on the loose side and after the dyno it hit the housing
  10. roadkill748

    Typhoon Went On The Dyno Today

    Re: Typhoon Went On The Dyno Today well the fittings are -4 but the line is alot smaller and i aso switched to brad penn hd30 oil so i dont know if that had somthing to do with it the truck has great oil pressure so i know thats not it
  11. roadkill748

    Flaming River Manual Steering anybody???

    Re: Flaming River Manual Steering anybody??? i was thinking of one for my typhoon but now i think im going to get a flaming river manual rack and pinion quick ratio and alot less weight
  12. roadkill748

    Typhoon Went On The Dyno Today

    Re: Typhoon Went On The Dyno Today the turbo is a Turbonetics 76GTS and the block and head are Cast Coat Gray
  13. roadkill748

    Typhoon Went On The Dyno Today

    Took The Typhoon To Speed Inc's AWD Dyno Today Only Did 3 Pulls And Had Just 15 Pounds Of Boost And 15 Degrees Of Timing In It But It Still Put Down Over 520 Foot Pounds Of Torque At only 2500rpm On The 3rd Run The Turbo Seized Because Of A Too Small Oil Feed Line (-4) Oh Well I Need To Talk To...
  14. roadkill748

    Fuel pump for 500-600+RWHP

    Re: Fuel pump for 500-600+RWHP the only way to get an a1000 to last on anything thats daily driven is use a boost a pump as it turns down the pump when u are just driveling around town no race pump is rated for daily driver use
  15. roadkill748

    VRE Project 10sec Typhoon

    Re: VRE Project 10sec Typhoon
Top