Recent content by sy#945

Re: 20G Identification? Check the inlet of the turbine housing you should have a number stamped there weather it is 8,10,12, or 14. That will tell you how many cm2 it is.

Re: Performance Parts: 63# Injectors, Profec B Spec II, BOV, Upper Intake, etc. Re: Performance Parts: 63# Injectors, Profec B Spec II, BOV, Upper Intake, etc. Im interested in the scanmaster 3, could you do 220 shipped?

Re: td06h-20g 14cm anyone? Will do thanks. Enlarged flange? For the inlet or outlet?

Re: td06h-20g 14cm anyone? Bump. C'mon guys I know that there are members out there that have upgraded from the 20g to a pte and now just have their old turbo just laying around their garage. If anyone has one or knows someone else that has one please point them in my direction.

Re: td06h-20g 14cm anyone? I do currently have a stock turbo and as for how much am I looking to spend I'd have to say about the avrage price they sell for. Which from what I can tell from all the ones that have sold in bad shape (needs a rebuild and tlc) go for $300ish and ones in good...

Re: td06h-20g 14cm anyone? Have all supporting parts which includes an rpm 9/11 2800 stall torque converter, external gate on crossover pipe, air/air intercooler, 60# injectors, Lincoln mark eight fan, etc. I'm not to sure on porting a 10cm up to a 14cm because then you have something that may...

After a long time of gathering all the parts for my build the last piece of my puzzle is the turbo, the illusive td06h-20g with a 14cm turbine housing. I've tried waiting for one to pop up for sale but I can't wait forever in hopes of one to surface. Just like usual preferred minimal shaft play...

Re: Who daily drives there truck? Re: Who daily drives there truck? Not me

Re: Dead or Alive Syclone #945 alive and awesome!

Re: 2 and 3 gauge pods Pm sent

Re: Comp Cams 1.6 Ratio SBC Chevy Pro Magnum 7/16" Roller Rocker Arms did you have to change or modify your heads in any way to run them? (other than of course arp rocker arm studs) because i have a set of these rocker arms and was wondering if it would be worth putting them on or if there is...

Re: Roller rockers............yaaaayyyy Yea this is turning into a runaway thred so back to what the thred was originally about. So pretty much 1.52 comp cam pro magnum full roller rockers should be fine with the stock press in studs so long as you are using the stock cam. Right? Now 1.52 may...

Re: 20G or PTE-51,52? Hello its just a six I have a questionable the turbo cartridge you posted. I am trying to modify my turbo with a 20g compressor housing and cartridge will the turbine that you posted on the cartridge fit in the stock turbine housing or would I be better off just getting a...

Re: 50lb Injector/Chip/MAP package I may be interested, quick question would a 20G be sufficent for the injectors? I am planing on running code 59 on my truck this spring and was more interested in the 3 bar and injectors if the chip will work for a 20G that would be fantastic, please let me...

Re: walbro 255, roller rockers LOWER PRICES .. F/S Are rockers still for sale?