Search results

Re: Best adhesive for cladding? I had the piece of cladding on the drivers door loosen up. The are round pieces of plastic (6) that are attached to the door and are wedged under the cladding. On my truck, the round pieces popped off of the door and where no longer holding the cladding on.

Re: OddFire v6 Blow thru e85 If the engine is a true odd fire, you can't change to an even fire without changing the crank and cam, before you mess with the ignition.

Re: Custom billet Cranks by SCAT or KINGS Are you talking an odd or even fire crank. I looked at Modex many moons ago and found them to be a little unreliable. You might have to wait a long time.

My email is tom3946@earthlink.net.

Would like to buy rust free pick-up box for 91 Syclone. Buyer is in Indiana. Will accept any GM Chevrolet or GMC box. Contact Tom at tom3946@earthlink.net. Thanks.

Re: Let's see your non stock wheels on a Sy/Ty Try calling Transwheel is you want the actual Ty-Syh wheels.

Re: Nice 92 Ty for sale. What wheels do you have on the front and the back? Are they 16 inch wheels? Thanks.

Re: brodix heads Are the heads straight or angle plugs? Can tell from the pictures.

Re: 2014 Chevy V6 The stock V6 all aluminum engine puts out 305 HP. Just think it could do with a turbo.

Does any one know if the new Chevy V6 will bolt up to a Sy and is it strong enough to take a torso?

Re: abs unit It is probably the electronic modular. Give Module Master a call 888-892-0764. Get it checked first to be sure if it is the module. They can rebuild it....

Re: Transmission Cable Bracket The stock bracket has a 90 degree bend in it. Not sure if the one you emailed will work, but thanks for your response. I was hoping that one from a Bravada might work.

Does anyone know if there is a replacement (alternate) transmission cable bracket that attaches to the transmission and hold to shift cable. Front drive shaft broke and bent the bracket. May also need the cable don't know yet. Any suggestions?

Re: transmission help Well I broke the front prop shaft. Replacing it is the easy part. It looks like I need the bracket that holds the shift cable, may even need the shift cable, don't know yet. Any Ideas on where I can get a shift cable bracket. A broken props haft can do a lot of damage...

Is there a replacement for the stock rubber torsion bar stop in poly?

Re: Aww crap... Xover tube Got first cross over tube from carbon fiber guy. He is looking at $350 to $400 each plus fright. It looks great on the outside; however, it has a typical vacuum bag interior ( a little rough). may take a look at putting an epoxy coating on the inside to reduce the...

Re: Aww crap... Xover tube Not sure about indestructable, but it should flow more air. Some of the excess bends will be eliminated and it will fit my Syclone. The timing is slipping. The carbon fiber guy works on a American LeMans car and the sustained some damage in Georgia. I'll keep you...

Re: 2 billet oddfire cranks Will they magnaflux and how many races are on them?

Re: Aww crap... Xover tube I'm looking at having one made out of carbon fiber. Mine cracked and sent some pieces into the turbo. If interested in a carbon fiber replacement let me know. It's probably a month away.