Search results

We no longer have 92 octane available here in the Anchorage area. I would like to use xylene. I don't need 30% mixture. I just want to get to the 92 or better octane for the street. I was thinking perhaps 2 gallons of xylene for each fill up with 90 octane fuel. Should I also be using mystery...

I have the RPM downpipe with Innovative minigate attached to Stealth 70 turbo. I can't seem to get the exhaust leaks to go away. I have tried muffler cement but it just blows it out of the gaps. I believe I need something that will withstand high temps but don't know what is recommended. How...

I'm new to chip burning and am having problems. I am using the Flash and Burn from Moates as well as 29C256 chips. The problem is as follows: ERROR: Chip memory range must be divisible by 64 ERROR: Source memory range must be divisible by 64 What do I enter into the Chip addressing start and...

Anybody using this burner? Worth the money? I'm looking for something that is user friendly. I'm going to use the Romulator. Has anyone put up good instructions yet on what variables are used and what they are used for. I think I have my bin loaded in it but without the truck running I can't...

Before I order a rocker arm stud kit, I need to know what threads are required. I'm thinking 10mm bottom threads. If so, these things are expensive! 23 dollars for two studs! I'm using the crane gold roller rockers. 3/8 studs with 10mm bottom thread? Thanks

I need some good pics of this setup installed on there truck. I'm trying to figure out the geometry of the intercooler and piping. Without a motor in the truck I am stumped. I want to see whether I need additional parts or not. Thanks,

I picked up a Ford fan from the taurus 3.8l . Having some difficulty finding 70 amp relays. I need some part numbers and places to buy. I will be hooking it up through a switch in the cab. Should I use just the low speed portion or the high side? Every place I went to doesn't carry this big a...

I need someone to throw some ZR1 wheels on my TY. Looking at the black ones versus the polished aluminum. Will email photo to you. It would be nice to see a side by side comparision. Thanks Will be purchasing a set soon and will want to get opinions from the syty community....

Just wanted to find out what would be the general consensus on injector size for this turbo. I would like to use 50lb's. Will these be sufficient? I want to stay away from doing the ecm mod for low impedence injectors. Thanks guys

Been looking for about two hours with no results :x I think I seen pictures of an adapter that is used between a T-72 and stock exhaust manifolds. Can somebody lead me in the right direction? Thanks,

Since getting XP Pro upgraded with service pack 1, I can't get Datamaster to initialize. Anybody else encounter this problem? If so, what did you end up doing?

Hi all, I am in need of some leaf springs but need to know the "Free Arch" meaurement of the stockers on the Typhoon. The spec is not listed in any of the manuals. Anybody have this measurement for me?? Thanks, Pete Gardepe

Well, I just got off the phone with Hunter. Told me he went to the track Sunday. He "forgot" to tell me he was going! Damn it :x Had Datamaster and tools. Truck has stock block with eagle rods, trw pistons, total seal rings, stock crank. ported L35 heads. T72 turbo, 72 or 75 lbs...

I should get my K&N(RU-3130) anyday now. What should I do with the lines from the valve covers once I remove stock air box and cross over tube? Thanks, Pete

Hi guys and gals. Made a short datamaster run today, and wonder if someone can have a look at it. I'll have to e-mail it to you. Truck is stock for the most part. Stock turbo and wastegate. Open exhaust (yea know about the overboosting ;) ), new cap and rotor, plugs, wires, AFPR (set at 50...

Anybody have a good pic of where to attach the lower portion of the engine tiedown? I see that it is attached to the back of the alternator at the top but can't seem to figure out where to put the other end. Pete

OK, I hooked up a fuel pressure guage today to see if it holds pressure. Turned the key, heard the pump(walbro) cycle and then jumped out to check the pressure. It was falling quickly. went back to 0psi in about 15 seconds. Started the truck and watched the pressure guage again. Stayed at...

OK guys, I've been dealing with a code 45 problem which is the O2 sensor and or the purge canister. Upon starting the engine when cold, the truck runs like crap. Does not respond to throttle input without wanting to cut out. It does this until the check engine light comes on(approx. 2 minutes)...

Hi all - just a couple of quick (hopefully easy) questions. The Ty is running super delicious - but her starts are not that great. We did the ol' paperclip type test and come back with a code 13. We know it's engine coolant sensor - but here's the symptoms so we know if we just need to...