Search results

I'm about to install a coil over front suspension on my TY. while I'm at it I'd like to put big brakes up front and disc brakes in the back. I'm looking for suggestions. I'v seen the setup that puts late model Camaro brakes on the front but I'm not convenced that Baer, Wilwood or SSBC might not...

I've replaced the water pump on my TY while I was at it I replaced the Belt, Belt tensioner and pully. The tensioner pully bounces. The folks at the local radiator shop suggested the belt was too long. I replaced it with one an inch shorter. Some improvement, but it bounces more that belt...

Hi Guys. while I was making some changes on my TY I noticed a hose connection on bottom/front of the throttle body. It has no hose connected to it?? It is about 3/4inch and from the looks of it does'nt seem to have been used. I've looked at the engine vacuum harness guide in my service manual...

I'm I missing something? I don't see how I can get the pitman arm off my Ty w/o removing the steering box. Everything else seemed streight forward (Tie rods ends, Idler arm etc). The pitman arm has me scratching my head. Anybody have an easy solution?

I've just rebuilt the steering on my TY. The question is "Do I set it up to factory specs" or is there a better setup?

I've got a strange vibration. Brand new Z06 18x9.5 wheels and BFG T/A tires balanced . Vibration starts about 65mph and gets worse with speed. I don't find much play in the front or rear drive shafts. there is some radial play in the front drive shaft. I don't know how much play is acceptable...