Project Insanity: New motor start-up - SyTy/SGT

Syclone0565 · 01-04-2009, 06:49 PM

Well, New motor is finally in and running as of today. Started it up and let it run to make sure oil pressure came up and everything looks good. Had to burn off the assembly lube and it was running a little rich. Its just good to finally hear it run and see the oil pressure come up and idle @ 50 psi

New built motor start-up 09

sycho · 01-04-2009, 07:33 PM

sounds nice, feels good to have all the hard stuff done dosent it! no intercooler?

syty9933 · 01-04-2009, 08:05 PM

sick

AWDcameoLSX · 01-04-2009, 08:13 PM

Does this mean we got a slew of cool new videos to watch coming

Syclone0565 · 01-04-2009, 08:59 PM

Quote:

Originally Posted by AWDcameoLSX

Does this mean we got a slew of cool new videos to watch coming

OH YEAH ! ! ! ! New videos to come real soon...

As for an intercooler. I had a W2A setup on it before I put the motoer in and went to a A2A. Its setting right here but I did not get it completely done so I just hooked up the pipe straight to the motor so the tune would still be close for the initial start-up. It will be going on along with the 50mm BOV and ALKY injection.

INDYTYCLONE · 01-04-2009, 09:40 PM

Sounds very nice. No mistasking that for a V-6.

sycho · 01-05-2009, 05:18 PM

cool, intercooled means its a street/strip truck, i know the fast buick guys that build 1/4 mile cars run on alcohol and dont need to be intercooled or even have a radiator or water in the block! dont think you can run on the street like that for long tho.

01-04-2009, 06:49 PM	#1
Syclone0565 Donating Member Join Date: Apr 2006 Location: Louisville, KY Age: 40 Posts: 648 iTrader: 24 / 100% '91 GMC Syclone	Project Insanity: New motor start-up Well, New motor is finally in and running as of today. Started it up and let it run to make sure oil pressure came up and everything looks good. Had to burn off the assembly lube and it was running a little rich. Its just good to finally hear it run and see the oil pressure come up and idle @ 50 psi New built motor start-up 09 __________________ SOLD - 99 427 FRC Corvette SOLD - LSx Turbo Sy <<<< NEW project under construction >>>> ______Details in builds thread To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. ______

01-04-2009, 07:33 PM	#2
sycho Member Join Date: Jul 2005 Location: easton MD Posts: 200 iTrader: 1 / 100%	Re: Project Insanity: New motor start-up sounds nice, feels good to have all the hard stuff done dosent it! no intercooler?

01-04-2009, 08:05 PM	#3
syty9933 youngin status Join Date: Dec 2008 Location: Fredericksburg, VA Age: 17 Posts: 748 iTrader: 4 / 100% '91 GMC Syclone	Re: Project Insanity: New motor start-up sick

01-04-2009, 08:13 PM	#4
AWDcameoLSX Thinking = Over-rated Join Date: Nov 2008 Location: Rhode Island Posts: 101 iTrader: 1 / 100%	Re: Project Insanity: New motor start-up Does this mean we got a slew of cool new videos to watch coming

01-04-2009, 09:40 PM	#6
INDYTYCLONE GMC-Accept no substitute! Join Date: Oct 2007 Location: N. Tacoma, WA Age: 39 Posts: 118 iTrader: 6 / 100%	Re: Project Insanity: New motor start-up Sounds very nice. No mistasking that for a V-6. __________________ 1993 Tyclone (87 Blazer Clone) White/White(Sold to Bender) 1984 S-10 Blazer 2WD HT 3.4 5 speed Black 1984 S-15 Jimmy 2WD (RIP) 1999 Silverado Ext cab SB LT 2WD Black 1974 L-48 Corvette coupe

01-05-2009, 05:18 PM	#7
sycho Member Join Date: Jul 2005 Location: easton MD Posts: 200 iTrader: 1 / 100%	Re: Project Insanity: New motor start-up cool, intercooled means its a street/strip truck, i know the fast buick guys that build 1/4 mile cars run on alcohol and dont need to be intercooled or even have a radiator or water in the block! dont think you can run on the street like that for long tho.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode