Bin patch file to improve TunerPro ALDL connectivity. - SyTy/SGT

turbodig · 08-14-2006, 04:01 PM

The link below is a patch file to fix some receive setup problems in the $58 code.
This seems to fix Moates Autoprom connectivity in Emulation mode on the vehicles that it's been tested on so far.

It also makes Tunerpro in general connect a lot better/faster, even with a regular cable.

To patch, you'll need to have patcher from:
http://www.digwaretech.com

Follow the Bin Patcher menu.

From there, just patch your Syty bin with the txt file at the link below.

This should work with all the released wide-band patches that I've done, but I can't guarantee how well it'll work with someone else's.

This also won't work with my early Syty extended F77 patch, so if you're running that, you'll need to remove that patch first.

You can get this patch at:

http://digware.lunarpages.com/digware/aldlpatch.zip.

This patch is freely available to anyone who wants to use it. As with any code patch, stuff can go wrong. This is a very early beta patch, and has only been tested on a few applications.

Usual disclaimers apply:
User assumes all risk! Allow 4-6 weeks for delivery! Do not taunt Happy Fun Ball! Do not take internally!

Later,

skwayb · 08-14-2006, 05:02 PM

I helped initially test this patch and it is awesome. It makes it so you can finally use your AUTOPROM in TunerPro to emulate and log at the same time in $58. Also it makes it connect very quickly in both TunerPro and Datamaster.

In Datamaster the waiting PCM sync only shows up briefly. No more sitting there waiting for it to connect up for a couple of seconds. It just connects asap.

I haven't tested this on EFILIVE so not sure if it works with it.

Thanks Dig for making this patch.

Wikid 1 · 08-14-2006, 05:55 PM

umm okay. maybe i'm not understanding this. I'm hitting run, then running the patcher, but all i get is a small window that says; SyTy patcher by Dig Usage- patcher.exe <binfile><patchfile> and i hit the okay and it dissapears...

MRKING · 08-14-2006, 06:26 PM

"Command syntax is as follows: (assuming you extracted the files to c:patcher)

patcher c:mybindirmychipbin.bin c:patcherptchfile.txt

This will apply the patch contained in ptchfile.txt to mychipbin.bin, and will output the results to mychipbin.bin.pch "

Then change the file extension on mychipbin.bin.pch to mychipbin.bin and upload to chip/emulator .

***SyTyArchives*** · 08-14-2006, 07:15 PM

Quote:

Originally Posted by skwayb

I helped initially test this patch and it is awesome. It makes it so you can finally use your AUTOPROM in TunerPro to emulate and log at the same time in $58.

I feel like I owe people beers. I heart you guys.

turbodig · 08-15-2006, 12:32 PM

Quote:

Originally Posted by SyTyArchives

I heart you guys.

That's right up Jeff's alley.

Better bring wine coolers for him...

later,

TwinTurboV8Ty · 08-15-2006, 12:37 PM

Quote:

Originally Posted by turbodig

That's right up Jeff's alley.

Better bring wine coolers for him...

later,

Jeremy said exclusivly after my weekend with his wife I can't snuggle in bed next to him. Got a spare room key dig?

turbodig · 08-15-2006, 01:03 PM

Quote:

Originally Posted by JS Manufacturing

Jeremy said exclusivly after my weekend with his wife I can't snuggle in bed next to him. Got a spare room key dig?

Sorry. Fresh out.

sytyguy · 08-15-2006, 01:17 PM

Hey now, if code59 is slang for a gay switcheroo, then I'll hafta go back to $58. Crap, I've had this gay code in my truck for weeks now, no telling how my truck has been influenced. Pretty soon, the truck will only go in reverse with the tailgate down.

Hood

***Sy#2661*** · 08-15-2006, 01:47 PM

Quote:

Originally Posted by sytyguy

Hey now, if code59 is slang for a gay switcheroo, then I'll hafta go back to $58. Crap, I've had this gay code in my truck for weeks now, no telling how my truck has been influenced. Pretty soon, the truck will only go in reverse with the tailgate down.

I am beleiver that your born gay. No amount of gay porn & influences is going to rewire my desires.

I think your truck will be all set, unless ofcourse you notice that your truck has propensity to back up & shove varies item into its exhaust.

ashman · 08-15-2006, 02:04 PM

yeah, i met Jeff this past weekend, with a bunch of GUYS at Hooters. All we talked about was trucks!!! The waitresses were rubb'n dem BooBies all over us and no one said a word.

sytyguy · 08-15-2006, 02:30 PM

Quote:

Originally Posted by dgoodhue

I am beleiver that your born gay. No amount of gay porn & influences is going to rewire my desires.

I think your truck will be all set, unless ofcourse you notice that your truck has propensity to back up & shove varies item into its exhaust.

Don't get me started on that subject. My Christian beliefs shine through in that matter, and I have a stern opinion on that subject.

Anywho, back to the lighter side of things. I've already casterated my exhaust @ the DP, so no chance of anything being inserted rearward. But, I did notice that my lumbar self inflated this morning, and it seemed to be much more snug around the azz area. Hmmmm......

Might hafta buy a Typhoon (that's the female version of these trucks for those of your that dont know - better looking rear, softer skin, etc...) to get my truck back on my side of the fence.

Hood

TwinTurboV8Ty · 08-15-2006, 02:49 PM

Quote:

Originally Posted by sytyguy

Might hafta buy a Typhoon (that's the female version of these trucks for those of your that dont know - better looking rear, softer skin, etc...) to get my truck back on my side of the fence.

Hood

I always thought the syclone was the female version since it has a bigger trunk.

sytyguy · 08-15-2006, 02:52 PM

Quote:

Originally Posted by JS Manufacturing

I always thought the syclone was the female version since it has a bigger trunk.

True, but you can't put anything in it. So, it's a guy.

Hood

2kwik4u · 08-15-2006, 04:12 PM

I've seen Jeff's Syclone have a "trunk" full of stuff on several occasions......

I think I need to keep my trucks the hell away from him for awhile!!!

08-14-2006, 04:01 PM	#1
turbodig ... nuthun'. Join Date: Jan 2001 Location: Sabin, MN Age: 39 Posts: 3,648 iTrader: 3 / 100%	Bin patch file to improve TunerPro ALDL connectivity. The link below is a patch file to fix some receive setup problems in the $58 code. This seems to fix Moates Autoprom connectivity in Emulation mode on the vehicles that it's been tested on so far. It also makes Tunerpro in general connect a lot better/faster, even with a regular cable. To patch, you'll need to have patcher from: http://www.digwaretech.com Follow the Bin Patcher menu. From there, just patch your Syty bin with the txt file at the link below. This should work with all the released wide-band patches that I've done, but I can't guarantee how well it'll work with someone else's. This also won't work with my early Syty extended F77 patch, so if you're running that, you'll need to remove that patch first. You can get this patch at: http://digware.lunarpages.com/digware/aldlpatch.zip. This patch is freely available to anyone who wants to use it. As with any code patch, stuff can go wrong. This is a very early beta patch, and has only been tested on a few applications. Usual disclaimers apply: User assumes all risk! Allow 4-6 weeks for delivery! Do not taunt Happy Fun Ball! Do not take internally! Later, __________________ Dig 11.94@114- 100% stock motor, 20G, 9/11. Built Motor, L35s, cam.... ?

08-14-2006, 05:55 PM	#3
Wikid 1 200+ lbs of puppy! Join Date: Feb 2006 Location: Ohio Age: 28 Posts: 178 iTrader: 1 / 100%	Re: Bin patch file to improve TunerPro ALDL connectivity. umm okay. maybe i'm not understanding this. I'm hitting run, then running the patcher, but all i get is a small window that says; SyTy patcher by Dig Usage- patcher.exe <binfile><patchfile> and i hit the okay and it dissapears... __________________ Uummmmm... Yeah, It's stock To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.

08-14-2006, 06:26 PM	#4
MRKING "3 wheeling Autocrosser" Join Date: Aug 2003 Location: Holiday , Florida Age: 31 Posts: 3,363 iTrader: 28 / 100%	Re: Bin patch file to improve TunerPro ALDL connectivity. "Command syntax is as follows: (assuming you extracted the files to c:patcher) patcher c:mybindirmychipbin.bin c:patcherptchfile.txt This will apply the patch contained in ptchfile.txt to mychipbin.bin, and will output the results to mychipbin.bin.pch " Then change the file extension on mychipbin.bin.pch to mychipbin.bin and upload to chip/emulator . __________________ Michael-- Syclone #309- 74gtq, Rpm Vortec heads, Rpm SS headers, PG Billet 4l80e, EFI-2114 Intake, 415 cam, 75# inj's , Alkycontrol.com Meth Injection, Hydroboost + 4 wheel Ls1 brakes, RPM Afco fronts & AD Afco rears w/ladderbars-pan bar, and dont forget CODE 59 To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. Typhoon #0593 - stock and ugly To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.

08-15-2006, 02:04 PM	#11
ashman ------ Join Date: Sep 2004 Location: BAMA Age: 41 Posts: 670 iTrader: 10 / 100% '91 GMC Syclone	Re: Bin patch file to improve TunerPro ALDL connectivity. yeah, i met Jeff this past weekend, with a bunch of GUYS at Hooters. All we talked about was trucks!!! The waitresses were rubb'n dem BooBies all over us and no one said a word. __________________ sy1096 Waller engine, To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. , To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)