SyTy/SGT - Forums

Go Back   SyTy/SGT - Forums > Members Area > Member's Projects & Photos
Reload this Page My motor is on the dyno
Home Register FAQ Members Chat Garage Calendar Search Today's Posts Mark Forums Read

Help Contribute to SyTy/SGT - Forums
Please support and help grow this great community by donating to any of the below Goals
Site Support [ Loading Progress Bar ]
Donate Now
Reply
Page 1 of 5 1 23 > Last »
 
Thread Tools Display Modes
Old 04-11-2009, 08:31 PM   #1
10secTy
Sy-Ty builder and Tuner
 
10secTy's Avatar
 
Join Date: Mar 2005
Location: Edmonton, Alberta
Posts: 819
iTrader: 16 / 100%
Send a message via AIM to 10secTy
My motor is on the dyno
Like the title says. Its been a long time coming. Kids sure take up alot of your spare time!!!

I will have vids and dyno sheets up. So far numbers
pump gas are 817hp at 13.5psi with 15 degrees of timing and 10.8 air/fuel ratio.
at 19psi on C16 with 28 dgrees and 12.0 air fuel ratio 1062hp.

On that pull the v band blew off at 6500 rpm its fixed and we will keep going tonight or tomarrow.

Nolan










__________________
1991 Syclone with LS7
Want your stock ECM'ed truck Custom tuned? Click
To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.

81 trucks custom tuned and counting

To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.

Calibrated Success Certified Advanced EFI Calibrator
10secTy is offline   Reply With Quote
Old 04-11-2009, 08:37 PM   #2
It's just a six
Super Member
 
Join Date: Nov 2005
Posts: 2,210
iTrader: 5 / 100%
Re: My motor is on the dyno
Very nice!

What octane pump gas?

Are you going to use methanol injection & pump gas also? Would be interesting compareing to running the C-16 .

Rick
It's just a six is offline   Reply With Quote
Old 04-11-2009, 08:41 PM   #3
syty9933
Donating Member
 
Join Date: Dec 2008
Posts: 901
iTrader: 5 / 86%
Send a message via AIM to syty9933
Re: My motor is on the dyno
nicee
syty9933 is offline   Reply With Quote
Old 04-11-2009, 08:58 PM   #4
syclone2003
Member
 
Join Date: Oct 2003
Posts: 58
iTrader: 0 / 0%
Re: My motor is on the dyno
Looks real nice. That should be one bad truck.
syclone2003 is offline   Reply With Quote
Old 04-11-2009, 09:03 PM   #5
10secTy
Sy-Ty builder and Tuner
 
10secTy's Avatar
 
Join Date: Mar 2005
Location: Edmonton, Alberta
Posts: 819
iTrader: 16 / 100%
Send a message via AIM to 10secTy
Re: My motor is on the dyno
I ran it on 94 its a ethanol blend gas.

No meth injection.

Nolan



Quote:
Originally Posted by It's just a six View Post
Very nice!

What octane pump gas?

Are you going to use methanol injection & pump gas also? Would be interesting compareing to running the C-16 .

Rick
__________________
1991 Syclone with LS7
Want your stock ECM'ed truck Custom tuned? Click
To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.

81 trucks custom tuned and counting

To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.

Calibrated Success Certified Advanced EFI Calibrator
10secTy is offline   Reply With Quote
Old 04-11-2009, 09:10 PM   #6
Quickstop [UK]
I want a Green Card.
 
Quickstop [UK]'s Avatar
 
Join Date: Jan 2006
Location: Wilmington, DE, USA
Age: 31
Posts: 2,911
iTrader: 15 / 100%
Send a message via Yahoo to Quickstop [UK] Send a message via Skype™ to Quickstop [UK]
Re: My motor is on the dyno
Jesus H - that's a lot of power. Nice work.
__________________
1992 White/Grey Saudi Arabia Typhoon 0546


To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.

To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.

To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.

To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.


I love
To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.
video!
Quickstop [UK] is offline   Reply With Quote
Old 04-11-2009, 09:46 PM   #7
hardtailcfl
Donating Member
 
hardtailcfl's Avatar
 
Join Date: Mar 2006
Location: Madison, WI
Age: 30
Posts: 305
iTrader: 13 / 100%
Re: My motor is on the dyno
WOW....that's just plain awesome I know where I'm goin if (I mean when ) my motor blows! Congrats!
hardtailcfl is offline   Reply With Quote
Old 04-11-2009, 09:56 PM   #8
TwinTurboV8Ty
Resident Dress Maker!
 
TwinTurboV8Ty's Avatar
 
Join Date: Oct 2000
Location: Jeffersonville, IN
Age: 35
Posts: 8,178
iTrader: 25 / 100%
Send a message via AIM to TwinTurboV8Ty
Re: My motor is on the dyno
Is that all you got?
__________________
Syty nats 99,00,01,02,03,04,05,06, 07,08
Homecoming '07, '08 "Most Innovative '08"
Big Bend Open Road Race '10

To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.

'92 Ty #1295 || Syclone #308 "sold
To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.
"|| '84 Buick WH1 || '34 Ford
TwinTurboV8Ty is offline   Reply With Quote
Old 04-11-2009, 10:14 PM   #9
silverblaz
Donating Member
 
silverblaz's Avatar
 
Join Date: Aug 2006
Location: Niagara Falls
Posts: 273
iTrader: 6 / 100%
Send a message via MSN to silverblaz
Re: My motor is on the dyno
WOW. great numbers the whole setup looks awsome

Glad i have you tuning my truck haha
__________________
86 S10 Blazer, typhoon 4.3 4 bolt mained , .030 over je pistons, eagle rods, arp bolt, vortec heads p+p, a2a, pte61, alky control, 60lb injectors, 700r4
silverblaz is offline   Reply With Quote
Old 04-11-2009, 10:20 PM   #10
Matt
Turbo Junkie
 
Matt's Avatar
 
Join Date: Sep 2005
Location: Edmonton
Age: 30
Posts: 584
iTrader: 9 / 100%
Re: My motor is on the dyno
Nice work, can't wait until it is on the road, do you plan on running methanol injection?
__________________
1992 Typhoon #0245 Alky control meth injection, 75Lb injectors, Cryoed stock crank and block, ported stock manifolds,4 Bolt Mains,Fully Ported Vortec Heads With 2.05-1.60,Cometic head gaskets,ARP Main & Head Studs,4 Bolt Billet Main Caps,Eagle Rods, Diamond Forged Pistons,Campbell Automotive Custom roller cam, 67mm Custom C/A turbo, Built By Campbell Automotive ,Tuned by Nolan 610HP-750TQ@24psi Runs 11.5s@119 with a good driver
To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.
Matt is offline   Reply With Quote
Old 04-11-2009, 11:52 PM   #11
10secTy
Sy-Ty builder and Tuner
 
10secTy's Avatar
 
Join Date: Mar 2005
Location: Edmonton, Alberta
Posts: 819
iTrader: 16 / 100%
Send a message via AIM to 10secTy
Re: My motor is on the dyno
Ok I just got home. we finished it off.

The final numbers came in at 1269hp@6900rpm 1089.2lbs@5600rpm

This was at 26psi with 24degrees of timing and 11-1 air/fuel ratio

We decided to stop there as the plugs where starting to finally show some heat.

Special thanks goes out to Mark and Don Campbell for all the help on this project.

More pics and vids will follow.

Nolan
__________________
1991 Syclone with LS7
Want your stock ECM'ed truck Custom tuned? Click
To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.

81 trucks custom tuned and counting

To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.

Calibrated Success Certified Advanced EFI Calibrator
10secTy is offline   Reply With Quote
Old 04-11-2009, 11:54 PM   #12
10secTy
Sy-Ty builder and Tuner
 
10secTy's Avatar
 
Join Date: Mar 2005
Location: Edmonton, Alberta
Posts: 819
iTrader: 16 / 100%
Send a message via AIM to 10secTy
Re: My motor is on the dyno
NO

Nolan



Quote:
Originally Posted by Matt View Post
Nice work, can't wait until it is on the road, do you plan on running methanol injection?
__________________
1991 Syclone with LS7
Want your stock ECM'ed truck Custom tuned? Click
To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.

81 trucks custom tuned and counting

To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.

Calibrated Success Certified Advanced EFI Calibrator
10secTy is offline   Reply With Quote
Old 04-12-2009, 12:09 AM   #13
Matt
Turbo Junkie
 
Matt's Avatar
 
Join Date: Sep 2005
Location: Edmonton
Age: 30
Posts: 584
iTrader: 9 / 100%
Re: My motor is on the dyno
You going to have it on the road before the nats?
__________________
1992 Typhoon #0245 Alky control meth injection, 75Lb injectors, Cryoed stock crank and block, ported stock manifolds,4 Bolt Mains,Fully Ported Vortec Heads With 2.05-1.60,Cometic head gaskets,ARP Main & Head Studs,4 Bolt Billet Main Caps,Eagle Rods, Diamond Forged Pistons,Campbell Automotive Custom roller cam, 67mm Custom C/A turbo, Built By Campbell Automotive ,Tuned by Nolan 610HP-750TQ@24psi Runs 11.5s@119 with a good driver
To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.
Matt is offline   Reply With Quote
Old 04-12-2009, 12:26 AM   #14
10secTy
Sy-Ty builder and Tuner
 
10secTy's Avatar
 
Join Date: Mar 2005
Location: Edmonton, Alberta
Posts: 819
iTrader: 16 / 100%
Send a message via AIM to 10secTy
Re: My motor is on the dyno
Not sure wife has got a bun in the oven and he's coming any day so we will see.

nolan

Quote:
Originally Posted by Matt View Post
You going to have it on the road before the nats?
__________________
1991 Syclone with LS7
Want your stock ECM'ed truck Custom tuned? Click
To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.

81 trucks custom tuned and counting

To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.

Calibrated Success Certified Advanced EFI Calibrator
10secTy is offline   Reply With Quote
Old 04-12-2009, 01:03 AM   #15
10secTy
Sy-Ty builder and Tuner
 
10secTy's Avatar
 
Join Date: Mar 2005
Location: Edmonton, Alberta
Posts: 819
iTrader: 16 / 100%
Send a message via AIM to 10secTy
Re: My motor is on the dyno
More pics







I will work on the vids tomarrow.

Nolan
__________________
1991 Syclone with LS7
Want your stock ECM'ed truck Custom tuned? Click
To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.

81 trucks custom tuned and counting

To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.

Calibrated Success Certified Advanced EFI Calibrator
10secTy is offline   Reply With Quote
Google Ads

Reply
Page 1 of 5 1 23 > Last »

« Previous Thread | Next Thread »

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes
Linear Mode Linear Mode

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -5. The time now is 02:48 PM.

Contact Us - SyTy/SGT Forums - Archive - Top

Powered by vBulletin® Version 3.7.3
Copyright ©2000 - 2010, Jelsoft Enterprises Ltd.
SyTy.net 2000-2010