91 GMC Syclone -LS1 Turbo AWD- - Page 2 - SyTy/SGT

GM TURBO · 05-12-2009, 05:19 PM

Quote:

Originally Posted by TwinTurboV8Ty

Buy a camper and keep the truck.

Getting rid of the camper top netted Ed Hess a 9 second timeslip.

nello · 05-12-2009, 05:24 PM

I remember your project page. One of the top five Syclones out there IMO. Had I known I would have already sold my truck and been knocking on your front door.

Happy house hunting and

for a bitchen truck!

Syclone0565 · 05-12-2009, 09:46 PM

Thanks guys. The other half is done with me spending all my time with the truck. I have to listen to it every time I go out there and its getting old after 3 years as you can imagine.

Perfect time to buy a house. I plan on starting a new project when I get the new house, ohh yeah, nice big garage also with new house. 60x40 or bigger. She already agreed to that one. I will get into another one and do it again. Just a little different direction next time.

As for the truck. it runs great. Its now A2A and the alky never did go on. I had planned on it though. You will be able to run 20-22 psi and 18-20* timing with the alky without a problem. That dyno run was also no water in the water to air so it was getting 150+ iats on the runs fast.

Truck has tons left in it. Modified gilbert prop shaft and a little beefier drive shaft.

Any other questions please email me as I get my email all day long but only get a chance to get online here late at night if I'm lucky.

Thanks

Syclone#2960 · 05-12-2009, 11:01 PM

Do you think I can drive this truck to Texas without any problems???

PM sent...

midnightbluS10 · 05-13-2009, 02:24 PM

What happened with that Corvette?

Syclone0565 · 05-13-2009, 08:12 PM

Quote:

Originally Posted by midnightbluS10

What happened with that Corvette?

Sold it to a Chevy dealer in California for 25K

Syclone0565 · 05-13-2009, 08:20 PM

TRUCK IS SOLD ! ! !

OK, Here's the twist. The guy I sold it to has a 4.3 and 700R4 that is going in it so I have sold it without all the good stuff

I have a Very large list of parts. Most with very, very little miles on them. I am working on putting the list together now with prices so please bear with me.

I have the two biggest items listed below that will hit the for sale section here in the next day or so. Thanks guys, its been fun

Fully built LS1 motor. (forged internals, ported polished heads) Long block. (less than 10 miles on it)

4L80E trans swap (RPM transmissions, JSM) Kit - trans, converter, cross member, transfer case adapter, extended prop shaft, and shortened drive shaft. (Less than 50 miles on it)

Thanks again.
Will

eviltwin · 05-13-2009, 08:21 PM

Quote:

Originally Posted by Syclone0565

Fully built LS1 (built to withstand 1500+hp)

just wondering what you have done to keep the mains from walking around if you were to go that high?

Syclone0565 · 05-13-2009, 08:26 PM

Quote:

Originally Posted by eviltwin

just wondering what you have done to keep the mains from walking around if you were to go that high?

Not for sure what they did exactly. I would have to ask. I spent 8k on the motor this summer from the machine shop/Fast Track Performance and they said it could put down 1300hp to the wheels all day long

Norm · 05-13-2009, 11:32 PM

So you sold your sy with out a engine tranny/transfer case? Wow, sure didn't think that would happen.

1madgumby · 05-13-2009, 11:43 PM

What the hell dude, you just got if togather!!!! I can't belive you...

Syclone0565 · 05-14-2009, 01:13 PM

I know ..............

R&C_RallySyTy · 05-14-2009, 01:34 PM

Wish I could afford the transmission. Any donations for poor members.

sy#2716 · 05-14-2009, 02:12 PM

Sad to see it go. If i didnt have the cash tied up in other things i would have bought it ( probaly been sleeping in it becasue the wife would kill me).

Try Me · 05-14-2009, 02:24 PM

And I was expecting the list of LSX powered syty's to go up, not down!

05-12-2009, 05:24 PM	#17
nello Do you like fishsticks? Join Date: Apr 2006 Location: Livermore, CA Age: 30 Posts: 1,079 iTrader: 11 / 100% '91 GMC Syclone	Re: 91 GMC Syclone -LS1 Turbo AWD- I remember your project page. One of the top five Syclones out there IMO. Had I known I would have already sold my truck and been knocking on your front door. Happy house hunting and for a bitchen truck! __________________ The truth isn't going to just show up in your inbox...

05-12-2009, 09:46 PM	#18
Syclone0565 Donating Member Join Date: Apr 2006 Location: Louisville, KY Age: 40 Posts: 648 iTrader: 24 / 100% '91 GMC Syclone	Re: 91 GMC Syclone -LS1 Turbo AWD- Thanks guys. The other half is done with me spending all my time with the truck. I have to listen to it every time I go out there and its getting old after 3 years as you can imagine. Perfect time to buy a house. I plan on starting a new project when I get the new house, ohh yeah, nice big garage also with new house. 60x40 or bigger. She already agreed to that one. I will get into another one and do it again. Just a little different direction next time. As for the truck. it runs great. Its now A2A and the alky never did go on. I had planned on it though. You will be able to run 20-22 psi and 18-20* timing with the alky without a problem. That dyno run was also no water in the water to air so it was getting 150+ iats on the runs fast. Truck has tons left in it. Modified gilbert prop shaft and a little beefier drive shaft. Any other questions please email me as I get my email all day long but only get a chance to get online here late at night if I'm lucky. Thanks __________________ SOLD - 99 427 FRC Corvette SOLD - LSx Turbo Sy <<<< NEW project under construction >>>> ______Details in builds thread To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. ______

05-12-2009, 11:01 PM	#19
Syclone#2960 11 sec. Sy & Ty. Join Date: Jan 2003 Location: Texas Posts: 1,576 iTrader: 13 / 100% '04 Chevrolet Colorado '06 Chevrolet Trailblazer SS '93 Jeep Wrangler '91 GMC Syclone '92 GMC Typhoon	Re: 91 GMC Syclone -LS1 Turbo AWD- Do you think I can drive this truck to Texas without any problems??? PM sent... __________________ Bruce Sy 3,045 lbs.

05-13-2009, 02:24 PM	#20
midnightbluS10 I'm a 4um superstar! Join Date: Dec 2001 Location: Shreveport, LA Age: 28 Posts: 3,767 iTrader: 0 / 0% '01 Chevrolet Blazer	Re: 91 GMC Syclone -LS1 Turbo AWD- What happened with that Corvette? __________________ Justin 2001 Blazer 4-door - ES - Bilstein Sport - Dynomax - K&N - DIY OEM Keyless Entry - DIY OEM Fogs

05-13-2009, 08:20 PM	#22
Syclone0565 Donating Member Join Date: Apr 2006 Location: Louisville, KY Age: 40 Posts: 648 iTrader: 24 / 100% '91 GMC Syclone	Re: 91 GMC Syclone -LS1 Turbo AWD- TRUCK IS SOLD ! ! ! OK, Here's the twist. The guy I sold it to has a 4.3 and 700R4 that is going in it so I have sold it without all the good stuff I have a Very large list of parts. Most with very, very little miles on them. I am working on putting the list together now with prices so please bear with me. I have the two biggest items listed below that will hit the for sale section here in the next day or so. Thanks guys, its been fun Fully built LS1 motor. (forged internals, ported polished heads) Long block. (less than 10 miles on it) 4L80E trans swap (RPM transmissions, JSM) Kit - trans, converter, cross member, transfer case adapter, extended prop shaft, and shortened drive shaft. (Less than 50 miles on it) Thanks again. Will __________________ SOLD - 99 427 FRC Corvette SOLD - LSx Turbo Sy <<<< NEW project under construction >>>> ______Details in builds thread To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. ______

05-13-2009, 11:32 PM	#25
Norm Donating Member Join Date: Apr 2005 Location: Winnipeg Manitoba Canada Age: 46 Posts: 2,120 iTrader: 15 / 100%	Re: 91 GMC Syclone -LS1 Turbo AWD- So you sold your sy with out a engine tranny/transfer case? Wow, sure didn't think that would happen. __________________ 1993 Typhoon #0040 (LS-2 Contender) 1962 Chevrolet Biscayne( low and mean) 2007 Toyota Tacoma 4x4( daily driver) "If it has tit's or tires, you can be pretty sure your going to have problems with them"

05-13-2009, 11:43 PM	#26
1madgumby Donating Member Join Date: Sep 2004 Location: Monroe, MI. Posts: 3,027 iTrader: 17 / 100%	Re: 91 GMC Syclone -LS1 Turbo AWD- What the hell dude, you just got if togather!!!! I can't belive you...

05-14-2009, 01:13 PM	#27
Syclone0565 Donating Member Join Date: Apr 2006 Location: Louisville, KY Age: 40 Posts: 648 iTrader: 24 / 100% '91 GMC Syclone	Re: 91 GMC Syclone -LS1 Turbo AWD- I know .............. __________________ SOLD - 99 427 FRC Corvette SOLD - LSx Turbo Sy <<<< NEW project under construction >>>> ______Details in builds thread To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. ______

05-14-2009, 01:34 PM	#28
R&C_RallySyTy Little Big Man Join Date: Apr 2008 Location: central PA Age: 25 Posts: 1,239 iTrader: 3 / 100%	Re: 91 GMC Syclone -LS1 Turbo AWD- Wish I could afford the transmission. Any donations for poor members. __________________ Syclone#2213 Project in Construction To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.

05-14-2009, 02:24 PM	#30
Try Me Sandbagger Join Date: Aug 2002 Location: Taneytown, MD Age: 28 Posts: 974 iTrader: 4 / 100%	Re: 91 GMC Syclone -LS1 Turbo AWD- And I was expecting the list of LSX powered syty's to go up, not down! __________________ King of SyTy Nationals 11 2009 Nats Outlaw SyTy and King of Syty Winner To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. - To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. - To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode