ed hess
- Thread starter Raist103
- Start date
Re: ed hess
http://www.njtruckscene.com/vb/showthread.php?t=2086
Morgan tipped me off on that thread...thats all i know. :dunno:
sucks for sure!
http://www.njtruckscene.com/vb/showthread.php?t=2086
Morgan tipped me off on that thread...thats all i know. :dunno:
sucks for sure!
Flyin Ryan
hated cuz he drives fords
Re: ed hess
damn.. they couldn't realize there was a spill in that lane wtf!
damn.. they couldn't realize there was a spill in that lane wtf!
alwayswantedone
Donating Member
Re: ed hess
Some info here http://gonedragracing.com/forums/viewtopic.php?f=3&t=3605
Glad he was ok. This sux being the second time for a accident at the track for him.
Some info here http://gonedragracing.com/forums/viewtopic.php?f=3&t=3605
Glad he was ok. This sux being the second time for a accident at the track for him.
BigBadSmoosh
Picking fights on I-65 since 2013
Re: ed hess
no way, I hope ed is ok..
no way, I hope ed is ok..
BigBadSmoosh
Picking fights on I-65 since 2013
Re: ed hess
ed, if you need any parts that I might have let me know..
on another note if you want an entire syclone I have one of those too =P
ed, if you need any parts that I might have let me know..
on another note if you want an entire syclone I have one of those too =P
ed hess
race or get outta the way
Re: ed hess
smaug
I need a frame, (need this b4 i buy anyting else)
btw 2wd or 4wd is ok
driver front fender
ft bumper
turn signal housing assy
rad support
arch cladding
rocker cladding
call me if you have a frame. actually call me either way
856-546-8439
between the harness, neck collar and full face coverage, this stuff did what it was supposed to do. I imagine if i had a hans device on i wouldnt have felt anything
that other thread that mentioned the suspension being bent was wrong. the frame crumple zones crumpled and they are before and behind the suspension mounting areas.
we finally had all the issues and changes out of the way and now i gotta build another truck.
I figure a month to swap to new frame and a month to refab anything that was fabbed b4 that got messed up.
this would mean i cant make anyruns while its 90-100 degrees out there with high humididty. big deal.
just need some help finding a frame.
ed
ed
smaug said:
smaug
I need a frame, (need this b4 i buy anyting else)
btw 2wd or 4wd is ok
driver front fender
ft bumper
turn signal housing assy
rad support
arch cladding
rocker cladding
call me if you have a frame. actually call me either way
856-546-8439
between the harness, neck collar and full face coverage, this stuff did what it was supposed to do. I imagine if i had a hans device on i wouldnt have felt anything
that other thread that mentioned the suspension being bent was wrong. the frame crumple zones crumpled and they are before and behind the suspension mounting areas.
we finally had all the issues and changes out of the way and now i gotta build another truck.
I figure a month to swap to new frame and a month to refab anything that was fabbed b4 that got messed up.
this would mean i cant make anyruns while its 90-100 degrees out there with high humididty. big deal.
just need some help finding a frame.
ed
ed
autoaddictions
Active member
Re: ed hess
oh snap. I just heard about the crash. Sorry ed that sucks. Glad you ok ! hope its fixable.
oh snap. I just heard about the crash. Sorry ed that sucks. Glad you ok ! hope its fixable.
BigBadSmoosh
Picking fights on I-65 since 2013
Re: ed hess
I'll give you a call in a bit probably after lunch.. I have the fender cladding, it would need some work but I have it.. rocker stuff I don't have extra of and my pieces are currently in PA..
ed hess said:smaug
I need a frame, (need this b4 i buy anyting else)
btw 2wd or 4wd is ok
driver front fender
ft bumper
turn signal housing assy
rad support
arch cladding
rocker cladding
call me if you have a frame. actually call me either way
856-546-8439
between the harness, neck collar and full face coverage, this stuff did what it was supposed to do. I imagine if i had a hans device on i wouldnt have felt anything
that other thread that mentioned the suspension being bent was wrong. the frame crumple zones crumpled and they are before and behind the suspension mounting areas.
we finally had all the issues and changes out of the way and now i gotta build another truck.
I figure a month to swap to new frame and a month to refab anything that was fabbed b4 that got messed up.
this would mean i cant make anyruns while its 90-100 degrees out there with high humididty. big deal.
just need some help finding a frame.
ed
ed
I'll give you a call in a bit probably after lunch.. I have the fender cladding, it would need some work but I have it.. rocker stuff I don't have extra of and my pieces are currently in PA..
Nova67ss
New member
Re: ed hess
Realy sorry for U´r Sy crashed, GLAD to her U´r ok, If we lived closer I had woulonteer for heling U tear and rebuild the Sy.
Regards Anders
ed hess said:smaug
I need a frame, (need this b4 i buy anyting else)
btw 2wd or 4wd is ok
driver front fender
ft bumper
turn signal housing assy
rad support
arch cladding
rocker cladding
call me if you have a frame. actually call me either way
856-546-8439
between the harness, neck collar and full face coverage, this stuff did what it was supposed to do. I imagine if i had a hans device on i wouldnt have felt anything
that other thread that mentioned the suspension being bent was wrong. the frame crumple zones crumpled and they are before and behind the suspension mounting areas.
we finally had all the issues and changes out of the way and now i gotta build another truck.
I figure a month to swap to new frame and a month to refab anything that was fabbed b4 that got messed up.
this would mean i cant make anyruns while its 90-100 degrees out there with high humididty. big deal.
just need some help finding a frame.
ed
ed
Realy sorry for U´r Sy crashed, GLAD to her U´r ok, If we lived closer I had woulonteer for heling U tear and rebuild the Sy.
Regards Anders