Will these fit my SY, like 'em
- Thread starter SY1616
- Start date
cameronsclone
New member
Re: Will these fit my SY, like 'em
Should work fine. Just check the offset, you'll probably need spacers. Nice wheels though:tup:
Should work fine. Just check the offset, you'll probably need spacers. Nice wheels though:tup:
T-Bone
Active member
Re: Will these fit my SY, like 'em
I bought a set of HRE 546's that looked similiar to the ones you are inquiring about. Unless you have a nice 13" set of Baer, Wilwood, or Brembo brakes on your truck, you will probably NOT be happy with these. The small spokes expose everything behind them and the stock braking system on a Sy or Ty looks pathetic when exposed. I spent $3,000 and found out the hard way.....maybe your taste is different though. All the best.
I bought a set of HRE 546's that looked similiar to the ones you are inquiring about. Unless you have a nice 13" set of Baer, Wilwood, or Brembo brakes on your truck, you will probably NOT be happy with these. The small spokes expose everything behind them and the stock braking system on a Sy or Ty looks pathetic when exposed. I spent $3,000 and found out the hard way.....maybe your taste is different though. All the best.
jjorgensen52
NHSTE - I'm the only one!
Re: Will these fit my SY, like 'em
I believe that for Z06 wheels (or anything with the same back spacing) the standard is no front spacers and 1.25" spacers in the rear (as they are a 56mm offset on the 9.5 wheel and a 65mm on the 10.5 wheel)
I believe that for Z06 wheels (or anything with the same back spacing) the standard is no front spacers and 1.25" spacers in the rear (as they are a 56mm offset on the 9.5 wheel and a 65mm on the 10.5 wheel)