Truck is in very nice condition. It was wrecked when I purchased it. I replaced the frame on it as it was easier for me to do that than to have it straightened. When I reassembled the truck I used all Geunine GM parts. I was working at a GMC dealership at the time so I was albe to buy it at a little over cost. The front bumper cover & support, fender & inner fender, grille, all of the lights on the front are all GM. The radiator & A/C condensor, fan, Right wheel cladding are also from GM.
The truck was repainted in base/clear & all of the door weatherstrips & window runs were replaced at that time. They are still very soft. The Syclone & GMC Truck decals are all from GM stock.
After the truck was reassembled the trans was rebuilt as was the engine. I do not believe that the engine block is the factory one, but it is the one that was in the truck when I bought it. I got to drive the truck very little & it spun a rod bearing. I pulled the motor & trans. Fast forward about 10 yrs.
I have collected alot of the parts to repair this truck to include:
+.030 SRP pistons & rings
ARP main & head studs
1.60 & 2.05 Stainless intake & exhaust valves
NEW Vortec Cylinder heads
422 Comp cam
ATI Super Damper
Program 4 bolt main caps
Solid motor mounts
Cometic head gaskets
Waller 57mm turbo
Progressive Alcohol kit
SFI Flexplate
New 50lb injectors
Volvo Electric fan & mounting kit
Complete LS1 brake kit with CBR mount kit
Hydroboost
ATR 3" exhaust & ATR W2A auxillary intercooler
E-dist with LS1 coils & plug wires.
Eagle Rods (one will need to be resized as bearing spun. Had Machine shop check it out & it would be no problem to do)
Borgsen steering shaft
A/C delete box
10-1 chip
JSM 4L80e transfer case input shaft
Universal V shaped Air to Air intercooler with lots of pipes & connectors
I know I am forgetting a ton of stuff. I have most of the reciepts from buying the stuff from GM. There should be almost everything to reassemble this truck here other than having the machine work done on the motor & a few gaskets.
I want to be very upfront on this deal. This truck has been sitting for 10 yrs so the fuel system & brake system should be flushed & or replaced.
The interior is very nice. However there is a small crack in left door panel under inner door handle. It has the Typhoon style power mirrors that are wired up & work. The ABS Module is still on the truck, but the ABS lamp was on the last time the truck was driven. It has the stock wheels polished, but could be repolished as they are dull. I just put the wheels & tires back on it today to take pictures. They have been off & stored in my basement so the tires are not flat spotted or weather checked. The truck has been stored inside all of the time that I have owned it.
I would rate the paint 8.5 out of 10, but I am very picky. It has a couple of scratches & could be buffed, but nothing that cant be easily fixed. I have pleanty of pictures to post. Please ask any questions & I will try to answer them as quickly as possible. I will not part out this truck, so dont ask. Its all or nothing. I have a clear, clean title in hand.
I really dont know what to price this at. I am going to start at $8000.00. I am willing to listen to any reasonable offers. Keep in mind there is lots of stuff that hasn't been listed that will go with truck. I invite you to come & inspect before buying. If someone is looking for a Great little project pickup this one is for you. Thanks, Byron
The truck was repainted in base/clear & all of the door weatherstrips & window runs were replaced at that time. They are still very soft. The Syclone & GMC Truck decals are all from GM stock.
After the truck was reassembled the trans was rebuilt as was the engine. I do not believe that the engine block is the factory one, but it is the one that was in the truck when I bought it. I got to drive the truck very little & it spun a rod bearing. I pulled the motor & trans. Fast forward about 10 yrs.
I have collected alot of the parts to repair this truck to include:
+.030 SRP pistons & rings
ARP main & head studs
1.60 & 2.05 Stainless intake & exhaust valves
NEW Vortec Cylinder heads
422 Comp cam
ATI Super Damper
Program 4 bolt main caps
Solid motor mounts
Cometic head gaskets
Waller 57mm turbo
Progressive Alcohol kit
SFI Flexplate
New 50lb injectors
Volvo Electric fan & mounting kit
Complete LS1 brake kit with CBR mount kit
Hydroboost
ATR 3" exhaust & ATR W2A auxillary intercooler
E-dist with LS1 coils & plug wires.
Eagle Rods (one will need to be resized as bearing spun. Had Machine shop check it out & it would be no problem to do)
Borgsen steering shaft
A/C delete box
10-1 chip
JSM 4L80e transfer case input shaft
Universal V shaped Air to Air intercooler with lots of pipes & connectors
I know I am forgetting a ton of stuff. I have most of the reciepts from buying the stuff from GM. There should be almost everything to reassemble this truck here other than having the machine work done on the motor & a few gaskets.
I want to be very upfront on this deal. This truck has been sitting for 10 yrs so the fuel system & brake system should be flushed & or replaced.
The interior is very nice. However there is a small crack in left door panel under inner door handle. It has the Typhoon style power mirrors that are wired up & work. The ABS Module is still on the truck, but the ABS lamp was on the last time the truck was driven. It has the stock wheels polished, but could be repolished as they are dull. I just put the wheels & tires back on it today to take pictures. They have been off & stored in my basement so the tires are not flat spotted or weather checked. The truck has been stored inside all of the time that I have owned it.
I would rate the paint 8.5 out of 10, but I am very picky. It has a couple of scratches & could be buffed, but nothing that cant be easily fixed. I have pleanty of pictures to post. Please ask any questions & I will try to answer them as quickly as possible. I will not part out this truck, so dont ask. Its all or nothing. I have a clear, clean title in hand.
I really dont know what to price this at. I am going to start at $8000.00. I am willing to listen to any reasonable offers. Keep in mind there is lots of stuff that hasn't been listed that will go with truck. I invite you to come & inspect before buying. If someone is looking for a Great little project pickup this one is for you. Thanks, Byron
Attachments
Last edited:
