transmission lines

[SYKLONE866]

I need some new tranny lines , where can I get some ?????

 

[NecroWolf]

Re: transmission lines

syty performance sells braided steel or just buy some hard line and make'em yourself

 

[sycho]

Re: transmission lines

stainless steel, pre bent for your truck just bolt on, lmc truck.com

 

[Don W.]

Re: transmission lines

I have the ones from RPM. Well worth it considering the PITA factor. Either way the fittings on the trans are b*&^*.

 

[Quickstop [UK]]

Re: transmission lines

stainless steel - needless expense. also the metal sheath is going to rub, cause friction and possible problems.

I went with rubber hose. No-ones going to see them any way.
If you fit hardline then you might get them knocking.

Do LMC truck fit the sytys? I am not sure they do. Good luck with that.

sytyperformance sell the adaptors you need though. $80 for the fittings +hose.

 

[NecroWolf]

Re: transmission lines

I went with rubber hose. No-ones going to see them any way.
If you fit hardline then you might get them knocking.

.

if you properly run the hardlines i don't see how you could get false knock

 

[Quickstop [UK]]

Re: transmission lines

if you properly run the hardlines i don't see how you could get false knock

rigid pipes should be ok but I have seen people mention it with the black plastic mounting clips failing and the lines vibrating.

I went with the rubber as I had a new longer 80 installed as well and the stock lines don't fit anymore...