Rear Ls1 brakes

ashman

------
Re: Rear Ls1 brakes

4C FED said:
You can see the C5 rear brakes I installed using the LS1 bracket here:

just curious, what's the difference in the C5 setup vs. the LS1?

rotor size? different caliper?
 

4C FED

Absolutum Dominium
Re: Rear Ls1 brakes

ashman said:
just curious, what's the difference in the C5 setup vs. the LS1?

rotor size? different caliper?
I don't think rotor size is any different, just the offset.

I used a C5 rear rotor as well, so that may have been why I had to do some additional mod's.
For one the bolt size for the caliper bracket to the backing plate is a larger diameter, so I had to drill the backing plate out to accomodate the bolt size.

And probaly due to the combo was that I had to mount the caliper bracket to the opposite side of the backing plate so that the caliper was centered over the rotor.
 

alwayscode390

pppssssshhhhhtttttttttttt
Re: Rear Ls1 brakes

With this swap, you can still use the ABS right? Do you use your stock sensors or the sensors that the ls1 rotors used?! Thanks ---
 

TurboJunk

questionable
Re: Rear Ls1 brakes

Ryda85 said:
cant seem to find the walkthrough for the ls1 rear setup
Give me a call i have them on my truckand i installed them on a sy already. ill walk you through it. also i can flair the orignal brake lines for you so you wont have to buy anything to mate the ls1 rear calipers.
 

Ryda85

Senior Member
Re: Rear Ls1 brakes

TurboJunk said:
Give me a call i have them on my truckand i installed them on a sy already. ill walk you through it. also i can flair the orignal brake lines for you so you wont have to buy anything to mate the ls1 rear calipers.


shoot me a pm with all the parts i need.....ill order them and we can have a wrench session at my house one weekend....i wanna do the fronts and rears in one shot....
 
Top