QUICK STORM
B.A.M.F. BMW Tech
there is a stud that is supplied in the kit that is supposed to thread into the altenator. does anyone have a pic of the kit install on the altenator, cuz the one on their site looks nothing like what i have. thanks.
Racetronix Harness?
- Thread starter QUICK STORM
- Start date
Syclone Rob
Its all ABOOT the SYTY eh
Re: Racetronix Harness?
I just took some pics for ya. I just installed my 'stock' alternator which was just upgraded to 140 amp with the larger stud for the racetronics kit. Truthfully I found it way too long which I will cut shorter. But it does hold the fuse holder nicely. If you want larger pics, just click on them for the full size. :tup:
sml.jpg)
sml.jpg)
Rob
I just took some pics for ya. I just installed my 'stock' alternator which was just upgraded to 140 amp with the larger stud for the racetronics kit. Truthfully I found it way too long which I will cut shorter. But it does hold the fuse holder nicely. If you want larger pics, just click on them for the full size. :tup:
.jpg)
.jpg)
Rob
QUICK STORM
B.A.M.F. BMW Tech
Re: Racetronix Harness?
can you take a pic of the hot wire off of the altenator
can you take a pic of the hot wire off of the altenator
Syclone Rob
Its all ABOOT the SYTY eh
Re: Racetronix Harness?
Sorry for responding late,
Here are the pics you requested.....
All connections to the alternator.. You can see the power feed for the racetronics harness!!
( I have to reclock the wires since they are too close to my liking to the bearing.)
Side view...
I hope this helps you quickstorm
Sorry for responding late,
Here are the pics you requested.....
All connections to the alternator.. You can see the power feed for the racetronics harness!!
( I have to reclock the wires since they are too close to my liking to the bearing.)
Side view...
I hope this helps you quickstorm
QUICK STORM
B.A.M.F. BMW Tech
Re: Racetronix Harness?
thanks, rob. you have been most helpful.
thanks, rob. you have been most helpful.
QUICK STORM
B.A.M.F. BMW Tech
Re: Racetronix Harness?
its a hardwired setup, more voltage and more consistent amps to pump.
ty166 said:
its a hardwired setup, more voltage and more consistent amps to pump.
Foot Performance
Donating Member
Re: Racetronix Harness?
that race tronix kit looks like the way to go but does it come with the 255lph pump or a diffrent on whe i looked on ther site i thought it said a 194m or something like that
that race tronix kit looks like the way to go but does it come with the 255lph pump or a diffrent on whe i looked on ther site i thought it said a 194m or something like that
Re: Racetronix Harness?
The Racetronix system uses the GSS340M Walbro 255lph pump as seen in this picture.
The complete kits come with the wiring harness, walbro pump, and the walbro pump installation kit...
Racetronix Sy
Racetronix Ty
The Racetronix system uses the GSS340M Walbro 255lph pump as seen in this picture.
The complete kits come with the wiring harness, walbro pump, and the walbro pump installation kit...
Racetronix Sy
Racetronix Ty
Foot Performance
Donating Member
Re: Racetronix Harness?
that is what i thougt but saw that 340 number and and it confused me thanks
that is what i thougt but saw that 340 number and and it confused me thanks
hardtailcfl
New member
Re: Racetronix Harness?
So not to bring up an old thread but I'm starting to put my engine bay back together and didn't pay attention to the alternator wiring
My question is this....I'm 99% positive I have the Racetronix kit installed (there's a single pretty large guage wire that runs from a relay near the fuel tank along the frame rails and up by the alternator) I also have the longer stud as referenced in this thread. From the pictures I can't decipher if anything is supposed to be hooked up to that stud???
So basically just wondering what wires go where on the alternator? When I took it apart I also had 1 wire running straight from the alternator to the battery. Am I wrong or aren't there 2 power wires already in the factory harness?
So not to bring up an old thread but I'm starting to put my engine bay back together and didn't pay attention to the alternator wiring
My question is this....I'm 99% positive I have the Racetronix kit installed (there's a single pretty large guage wire that runs from a relay near the fuel tank along the frame rails and up by the alternator) I also have the longer stud as referenced in this thread. From the pictures I can't decipher if anything is supposed to be hooked up to that stud???
So basically just wondering what wires go where on the alternator? When I took it apart I also had 1 wire running straight from the alternator to the battery. Am I wrong or aren't there 2 power wires already in the factory harness?
Last edited:
supersports10
New member
Re: Racetronix Harness?
sounds like you could use a little help.......if you want im local, and would be willing to help.
So not to bring up an old thread but I'm starting to put my engine bay back together and didn't pay attention to the alternator wiring
My question is this....I'm 99% positive I have the Racetronix kit installed (there's a single pretty large guage wire that runs from a relay near the fuel tank along the frame rails and up by the alternator) I also have the longer stud as referenced in this thread. From the pictures I can't decipher if anything is supposed to be hooked up to that stud???
So basically just wondering what wires go where on the alternator? When I took it apart I also had 1 wire running straight from the alternator to the battery. Am I wrong or aren't there 2 power wires already in the factory harness?
sounds like you could use a little help.......if you want im local, and would be willing to help.