Syclone #136

SY2932

SY2932

Administrator
Re: Syclone #136

Heh, it looks like you got all your ducks in a row
icon_lol.gif
! Are you going twin turbo or what
icon_wink.gif
rotf.gif
??? After you confirm that my geometry is kosher, I'll get that flange laser cut for ya so that you can start fabbing up your downpipe. Just let me know how thick you want it to be...

IMG_0870.sized.jpg


IMG_0963.sized.jpg
 
SY2932

SY2932

Administrator
Re: Syclone #136

Hope that these parts from the "SY2932 ARCHIVES" help you "get it back together" soon
icon_smile.gif
:

IMG_1915.sized.jpg

Deburred, degreased and bead blasted torque converter inspection cover.

I tell ya what, that cover had some of the WORST casting flash that I have ever seen... But you know who to blame
eh2.gif
icon_lol.gif
rotf.gif
:
IMG_1916.sized.jpg


IMG_1918.sized.jpg

Cleaned, bead blasted and modified for stock blower resistor NON AC blower housing.

Hope to have you "other" part any day now
icon_smile.gif
...
 
91blazins10

91blazins10

Active member
Re: Syclone #136

Well Brandon I guess you decided not to go with the a/c which is a good choice, because I threw away all my a/c stuff in process of moving into my new home :lol:
 
SY2932

SY2932

Administrator
Re: Syclone #136

Your downpipe flange got laser cut today:

IMG_1929.sized.jpg


However, I got it so late in the day that I didn't get to deck it and drill the mounting holes :(. Should be able to knock it out tomorrow though. Right now, it's looking like I will be working on a SBC this coming weekend so no "defection" to the East. PM me your mailing addy so that I can ship this via UPS so that you can keep moving on your truck. You can pay me the next time that we get together since I know that you are good for it
icon_wink.gif
...
 
SY2932

SY2932

Administrator
Re: Syclone #136

I was beginning to think that I wasn't ever going to get this on the mill
icon_frown.gif
. When the truck that delivers our material pulls up to the garage door, that means that it's towmotor time. Got a mountain of alumimum last week. Been behind the 8 ball ever since. Anywho got it decked and drilled tonight after work:

IMG_1934.sized.jpg


Been spending more than half my time at work these days, usually from 8 AM until 10 PM. Good thing I enjoy the work... I will ship this out tomorrow morning since I won't be defecting East this weekend either.
 
Aeroking

Aeroking

e.i.
Re: Syclone #136

12023110623.jpg


looks aewsome. :tup:



trans got done last friday. I'll pick it up tomorrow.
 
Last edited:
SY2932

SY2932

Administrator
Re: Syclone #136

Very nice :cool:! I trust eveything went together ok then? Don't forget that you are going to have to extend the wires on your plug slightly to reach...
 
Tooky

Tooky

Serious about performance
Re: Syclone #136

Nice!! Can we hear the specifics of the trans? What's in it? What kind of build? Cost? Rossler is top notch. What is "Ross-Lock"?
 
Aeroking

Aeroking

e.i.
Re: Syclone #136

SY2932 said:
Very nice, now I know why you painted that inspection cover black :lol:!
Click to expand...

actually, that was a complete coincidence. i wanted to test the paint on something that wouldnt be seen, before i painted the heater box. I didnt realize they painted the trans black. it looks good though.

RTI.JPG
 
Aeroking

Aeroking

e.i.
Re: Syclone #136

got the rest of my ARP hardware in yesterday.

and just got done checking all my clearances on the heads.

Piston to valve is great. I have to relieve some material from the heads, cause the pushrods were close to scraping. After that, it'll be a longblock. And my top end is still in an assembly, so i can drop it on, and the engine will be done, mechanically.

pics to come. :tup:
 
LIL QIK

LIL QIK

HELL YEA I GOT BOOST!
Re: Syclone #136

Aeroking said:
got the rest of my ARP hardware in yesterday.

and just got done checking all my clearances on the heads.

Piston to valve is great. I have to relieve some material from the heads, cause the pushrods were close to scraping. After that, it'll be a longblock. And my top end is still in an assembly, so i can drop it on, and the engine will be done, mechanically.

pics to come. :tup:
Click to expand...
Congrats....that's always a good feeling....
 
sy#2921

sy#2921

BAMF
Re: Syclone #136

Are you planning on using stock manifolds or headers? Reason I ask is in the pic above the plug in the side of the head wont work with a header flange from the looks.

Project looks nice though
 
You must log in or register to reply here.
Top