Recent content by Khalid_1

Re: Center Cap with lock OK this post is for those who are in the same position as I am .. missing one of the center caps. I looked through the Hubs.com and they are out of stock at the moment. Thanks for the advice and guidenance of all who responded, I managed to find a supplied of center...

Re: What stops the Turbocooler next to Throttle Body Hi All, Well, here is what I did. I removed the bolt under the IC and pushed the L-shaped bar to align with the center gap under the IC. It was not easy, as I think that L-Shaped bar had been bent and I had to work hard in fitting the bolt...

Re: best ignition coil for stock motor.. Thanks Ryan Regards, Khalid 91-Sy

Re: best ignition coil for stock motor.. So what is the part number on the stock AC Delco plug wires and stocke coil ? Anyone have that handly? Regards, Khalid 91-Sy

Re: Cold Air Intake - Is it worth the effort ? Spot On ! This is physics in simple form. Using the water hose analogy....you can test that by filling a container and measuring the time. Record the time of how long it took to fill the container. Now, empty the container, and filling it again...

Re: Cold Air Intake - Is it worth the effort ? Johnboy, Thanks for the photo of the restrictor. I saw it but I thought its function is to direct the amount of air to the opening of the air filter box and in particular to the opening in the box that is exposed to incoming air. Accordingly to...

Re: Cold Air Intake - Is it worth the effort ? Your setup is sweet in my view. Even without the cold air box, just having that ram air going to the fender should cool the engine bay (indirectly) to a small extent. I might take that on as a project just to introduce ram air scoop to the fender...

Re: Cold Air Intake - Is it worth the effort ? Hi Dave, A- Yes there is "cold air" in Qatar from end of October till March...especially at night time. You must had visited Qatar before to know that it is a hot country but not as hot as Kuwait or some parts of Saudia Arabia during summer times...

Re: Cold Air Intake - Is it worth the effort ? Restrictor? did not know there is one. Do you have a sketch or photo showing it ? What kind of panel filter would you propose? what size? would too much filters restrict the air flow ??? Update to the above: I know what you meant now. Thanks man...

Greetings all, I saw couple of postings about a Cone shaped cold air intake where the new air filter sits in the place of the overflow tank and the later is relocated to where the original air filter box is. Now it looks like the engine or in this case the turbo will get more air because of the...

Re: Center Cap with lock Thanks for the offer. I will try to source this here but if I could not find any....I will send you an e-mail. Regards, Khalid

Re: Center Cap with lock Sure...thanks. I will give them a call to check if it is really for Syclone. Just done that and you are right.... they do not have it anymore...but I left my contact so that if they get them, then they would contact me. I just wonder how I can make the same present...

Re: Center Cap with lock Hi, What is the bolts for ? Sorry but I did not understand? Is it the bolt that resides inside the center cap ? Khalid

Greetings, Awful thing happened. After replacing all the tires on my Sy, I think the mechanic did not lock one of the center caps correctly and it ended going missing after a while. I made some search on the web site and could not find any for sale. The thing is that once you buy one, you have...

Re: Lock Mechanism on Rear Hatch Thanks for the info Steve. I will be looking for the model you mentioned. Regards, Khalid 91-Sy