Search results

Needs to be in good running condition with as little shaftplay as possible. It's going to be tossed on the truck as a quick replacement so no broken bolts also. The cheaper the better, shipped to 63141!

Ok, now that I've got the front torsion bars turned all the way down I want to even out the truck with a set of drop blocks. I'm unsure of how far I've turned them down and what the actual drop was so I'm now unsure of what sized blocks to get. I was thinking that the 3" drop blocks would put...

I couldn't find a good write up or thread about this so I figured I'd start a new one. I've got the torsion bars fully lowered to where the keys are up against the far side of each slot. It lowered the front of the truck quite a bit but I want to get a little lower for now until I have the...

I'm looking for a stock, unmodified memcal because I think there might be a possibility that mine is starting or has gone out only because of how many codes the truck is throwing. I have two seperate ECUs (one that is in the truck and good and another that is supposedly junk) but memcal's are...

Alright, I made a pull with my new Datamaster setup and ALDL cable I received from Moates to find out that I'm not only detonating but also throwing a handful of codes. http://www.mediafire.com/?niztjyzmmyw There is the log, please help me before something blows :tdown:

Ok, i'm going to be upgrading my wheel/tire combination here very soon and I need some help. After looking around I found that I want to go with the split spoke Z06 C6 wheels 18x8.5 for the fronts 18x9.5 for the rears My only dilemma that I currently have is I'm unaware of what tire sizes to...

...and ordered a full Moates setup with, G1 adapter, and ADL cable. Here comes a good solid tune once I get another couple hundred to drop on wideband/boost gauge and some seat time with code59!

I'm looking for a set of 18x9 or 18x10" split spoke C6 Z06 wheels for my truck. Would rather replicas to keep the price down a lot. Without tires preferably as well. I want my truck to look like this: Thanks!

This is an ebay setup that has worked flawlessly for the 2,000 miles or so that I've put on it. It has only seen 93 octane gasoline and has never once leaked on me. Rise rate of 1:1 per boost and was always set at 43.5psi. Diaphragm doesn't leak and the seal is air tight. Looking to get rid...

Ok, background story I bought the car completely stock, has been that way ever since minus a lack of catback after the converter. I got into a situation with a bone stock looking Cougar XR7 and just about lost. Mind you I gave him a good bump but barely reeled him in before we let off. The...

Since the other drunken idea was a bust I decided to do a full write up on a real retrofitted HID setup for our trucks. TSX Projectors Pulled apart The soon to be fitted headlights First layer of paint and second layer

Looking to replace or repair a few pieces of cladding. Is this repairable? (One or two of the tabs are broken and the piece that mounts it to the sideskirt just crakcked off today. ...and I'm going to need both of these pieces....not happy :( Thanks guys!

Well, being as broke and a big drinker as I am I've decided to do this because I'm bored and well the obvious, it was CHEAP AS HELL! To begin with, I ordered these headlights from ebay...

Long story short, just drove from Columbia Mo to Denver Co straight in Ty 1190 with zero problems! I love this truck so far! Tomorrow is going to be the real test, mountain driving!!

I'm having a slight issue with 1190's left turn signal indicator. On the dash the < is lit up whether or not I have the signal on and both the front and rear left lights are on but don't flash. I'm unsure if these trucks have two flashers but I've replaced both the front and rear bulbs with no...

I'm on the hunt for a blacked out GMC grill for 1190 and a heavy duty shifter cable so I can get the truck back on the road. Also, if anyone has an ignition switch with key I'll take that as well. Shoot me some prices and if you have any of the above, thanks!

I need this asap or perhaps a part number so I can call a few local GM dealers to get one picked up. This is the piece that has the two seperate arms that clip onto the glass piece itself! Thanks!

I have one of each and both have been used a bit but are still in great working condition. The AEM has one problem that I'm not sure if it can be fixed but it does not hinder output at all. It seems to have a messed up line in the middle digit so a 4 for instance is missing the - in the middle...

This problem just started occuring on Friday and hasn't really bothered me all too much since the weather has been cooperative, kind of. On Friday I had full heat (mind you, it only comes out of the top vents and I don't know how to fix that either) but once I left school I noticed on full...

Ok here's the deal, since I'm daily driving 1190 I want a really nice functioning audio system with great SQ and a little bit of bass. From what I've been reading though the aftermarket dash install kits leave the headunit sticking out ~.5" and it's rather ugly. I've also noticed this in my...