Search results

Re: WTB Stock intake components + Coolant overflow tank Pics would be great

Re: Fastest stock turbo? It's a Rule 2000gph pump not a typeo. Rule Pumps Non-Automatic 12 Volt DC Bilge Pump 2000 GPH 10 As for stock yes the long block is stock!! My mod list is above. Boost spikes 22-23psi drops to 19-20psi

Re: Fastest stock turbo? I know this is a old tread. But figured I would post as I'm trying to run 11s on the stock turbo in my typhoon. So far best pass 12.34@107 Mods E85 fuel TT chip 255 fuel pump with rewire 80lb injectors Msd 6al Sportsmachine 3in catback 2.5in test pipe Sportsmachine...

Re: Bilstein rear shock part number for lowered TY. I have set up all 4 front and rear for sale. fronts were mounted and driven on for 10miles. Backs are still brand new in box. $250 shippped

Re: WTB Stock intake components + Coolant overflow tank You have pics of what you have now?

Re: WTB Upper Intercooler Bracket Upper Intercooler Brackets

Re: Transfer Case Viscous Clutch ? Chances are is you were to put the front prop shaft back in you will notice it will drive Like it's a 4x4 truck because the viscous is most likely seized

Re: Some People Should Not Be Allowed to Own a SYTY Rofl I find it funny someone thinks a DSM is more reliable Hahahhaha. Having been a DSM guy for 20years they are not Reliable. We have a saying, JSB crew I.E. jack stand baller

Re: Wicked Rich Idle What wide band do you have? Is the wideband gauge moving? Is the wideband in turner pro stuck at 14.5 or is cycling?

Re: Transfer Case Viscous Clutch ? If the VC is tight then most likely one could drive in rwd. Or if he VC is seized it would alow one to run In RWD as it would make the center diff act like it's welded.

Re: Transfer Case Viscous Clutch ? From my experience with AWD cars. Doing a dyno in 2wd Is a bad idea. Back in the day before AWD dyno we used to have to Install a VC eliminator to dyno in FWD on a DSM. If you did not do That it would burn up the VC or damage the center diff.

Re: Transfer Case Viscous Clutch ? Hey Sean. Are you headed to the dyno to do some tuning? If so I recommend finding A awd dyno to do your tuning. Tuning in rwd the tune will be way off once your back to Awd do to the difference in load. Any time you tune on a dyno your tune tends to need...

Re: Cleaning garage Pm sent

Re: syty performance (rpm motorsports) They should have sold you a piston the was 2618 and not 4032. The 4032 is intended for N/A to lightly boost applications. Good luck Getting a vender to warranty a piston. Your best bet is to get some new 2618 pistons. Because you had 4032 before Your...

Re: wheel alignment Just aligned mine after installing the JMS upper and lower control arms with the viking coilovers. I set toe at 0. Camber at -1deg. can't remember what caster was. I believe it was between 5-6

Re: What did you do to your SyTy today? (part 2) What water pump are you running

Re: What did you do to your SyTy today? (part 2) Installed a modded walbro 255hp with racetronic rewire. Installed and wired msd 6al with msd 2step. Installed trans cooler with fan and thermal switch Installed new trans cooler lines with all -6an fittings Installed turbo blanket and wrapper...

Re: E85 / 92 octane mix Needs more timming at start up and the cold start enrichment needs to be adjusted. I can get my evo to start in 30deg temps on e85 on the 3crank.

Re: Turbo rebuild kit http://www.sportmachines.net/store/turbo-intercooler/genuine-mitsubishi-turbo-rebuild-kit.html

Re: Turbo rebuild kit Sportsmachine