Search results

I have had my battery under my bed now for some time with no problems but would like to add some kind of fuseable link to the positive cable just incase something disastarous were to happen, has anyone done this? what are the options? thank you.

I removed my abs years ago, but now im doing some work on my rear diff and see all these electrical wires running to the rear wheels, are they all abs wires? can i cut them with no ill effects? just want to make sure they are not speed sensors or something before i snip them, thanks.

Has anyone been able to score this stuff locally? or is it strictly a mail order Item, where might I be able to score a can in lets say, Las Vegas, thanks .

My propshaft snapped the other night, so its time for replacement - problem, one of the bolts on the diff side is stripped to a nub. No this is not my doing, it looks like previous owner put it in with channel locks or something, anyway, no drill I have will put a dent in the bolt, will I have...

Pics of the heads on my syclone motor, it is a gm replacement motor from 1999 with the correct code engine code, but we all know to take that with little faith, here are some pics of the intake runners and casting numbers... some are crappy some are good, let me know what you think... I...

The common theme of anitgone blah blah blah smakidy smakidy Sophocles puts into the mouth of his eponymous heroine of Anitgone an argument justifying her defience to an decree of her King, creon, who forbade her to bury the exanimate corpse of her brother Polyneices. the question at hand is...

It likes to break apart and eat turbos, I always checked the sides of it where the clamps tighten to make sure it was not breaking apart, but a 2x2 inch section broke of in the MIDDLE of the crossover tube, on the underside I't wont build a single pound of boost anymore ;/ Anyone have a...

Im running this tranny cooler for my syclone its a HEADER style cooler, meaning the coolant dosnt flow in tubes back in forth across it, it just fills the cooler and fills each tube as it goes, in on one side and out the other, my questions is, which direction to mount the cooler? should I...

My truck has more steering slop than I would like, and more than i remember my first syclone having, heres what I have done to try to remedy the situation: Borgeson Steering Shaft 4 new balljoints new Steering Box Idler/Pittman Arm New control arm busings new tie rod Ends The truck dosnt...

Some things have been bugging me for a while, here are a few of them: The "Air inlet" tube on the drivers side: this tube plugs into the air box, its supposed to provide fresh air for the crankcase to replace oil vapors that the passenger valves pull out, how does it accomplish this when its...

my outside door handles move side to side about half an inch, does it require a new handle? or is there a mounting plate that gets replaced inside the door? dont see what could really let the handle move side to side, anyone have any experience with this? thanks ...

Is it alright to put the breather on the passanger side and put the valves + vacuum on the drivers side? assbackwards I know, but any reasons why it may not work correctly? :D thanks

I have the plate, but its flat, dont i need to block off the port in the intake? how do you guys do it?

In the middle of rebuilding the front suspension. have everything done cept lower balljoints and control arm bushings, well, i have the entire lower control arm unbolte and swung around, ez to get the bushings, but I cant figure out hoe to get the balljoint out? its about 1/4 of an inch below...

Does anyone have a pic of the above mentioned? been looking for hours and cant find any, even searched the archives, thanks

I looked on search and could not find anything, first for the brake pad : It's my front right brake pad, it has this rotational clicking coming from it, i cant for the life of me figure it out, it clicks from going all the way from 5mph to 70mph when road noise takes over, when I take the...

Went Down to LA this weekend from Las Vegas to have Mike Lee install a innovative external wastegate for me. When i got to his shop at the agreed time it took him about 30 seconds to get my truck in the air and start pulling the crossover. My friends and I went to get something to eat and...

Ok, First a little background, i was under the truck doing the fuel filter and noticed that on the torsion mount crossmember, the bolt that sits underneath the torsion bar(i think its the ride height adj bolt?) is crooked on the drivers side, nearly a 30 degree angle, while on the passenger side...

pics of my truck #507 Let me know what you guys think

I have a leaking proportonial valve by my master brake cylinder, before you all jump on my case, i will NOT be drving the truck under these conditions i was just wondering the severity of it, the reason i ask is because i complained to a gm dealer of soggy brakes and it throwing codes, they...