Search results

Re: Near complete Sy cladding set here is pictures the front arch the forward facing tab is broke off. I am wanting $125 + shipping and also have one other member interested but not committed yet

This is a duplicate post from "Truck parts wanted" where I incorrectly posted it I have most the cladding pieces with (4) mounting brackets (most of the pieces have damage and/or broken mounting tabs), Driver's under cab piece has been sold, Passenger under cab broke in half & driver's door...

Re: Near complete Sy cladding set just realized I put this post is in wrong place it should be in "for sale". I am going to recreate in proper place, please see this ad in the correct "for sale" forum to make any more posts/comments or to ask about any of the cladding pieces

Re: Near complete Sy cladding set I am selling, and I would be willing to sell piece by piece. give me a fair price and pay package and shipping as said in original post.

I have most the cladding pieces with (4) mounting brackets (most of the pieces have damage and/or broken tabs), Driver's under cab piece has been sold, Passenger under cab broke in half & driver's door piece is cracked ), also have the complete front bumper assembly, steel bumper support bars...

Re: ProtoTy Project looks like you got all that you need to complete the turbo plumbing on both ends. next couple weeks is going to be fun for you

Re: Sy #2811 engine and brakes since she has been sitting for more than 3 yrs out of commission a small problem has developed. Just a little rust, just enough to make little holes everywhere My solution was found at Advance Auto for $129.00 also, yes since the pump was in the gas laquer...

Re: Sy #2811 engine and brakes ok now its time to start with the oil lines and cooling. I am running the stock lines from the engine to the oil filter re-location bracket. From here I have completely reworked the cooling lines and cooler B&M Oil Cooler part # 70266 All hoses and fittings are -8...

Re: Sy #2811 engine and brakes no just find a way around the problem. the final fuel system piece just showed up on the door step :lol:

Re: Sy #2811 engine and brakes Thank you, yes it does pop, especially when it all comes together also I did a little knife edging on the inlet to the intercooler all braced up, the steel braided line is the turbo oil feed line

Re: Sy #2811 engine and brakes Thank you all for the compliments, it lets me know I am on the right track while maintaining the integrity of the build and respect of the community.

Re: Sy #2811 engine and brakes The T-Body was a Summit brand at a cost of $270 Summit twin 58mm T-body part # SUM-227706 Prep work to block and heads for paint was an acid bath then a rub down to remove any dried chemical cleaner a final dust off, the painting was done on a nice low humidity...

Re: Sy #2811 engine and brakes My build is going so fast only because it was mostly done before I started my posts. Everything was bought in advance before any work was started. I built a second motor before I even turned a wrench on the truck.

Re: Sy #2811 engine and brakes The linkage attached to the T-Body is a 2 piece, the outer bracket was the only modding needed. What I had to do for the bracket linkage was to grind out the two fixed rivet cable attachments, drill out the holes to the needed size for the SyTy bracket bolts that...

Re: Sy #2811 engine and brakes now with the upper plenum opened up to enable better breathing I got this to allow it in. Summit twin 58mm T-body part # SUM-227706

Re: Sy #2811 engine and brakes with the wire harness laid out in position. I re-loomed and taped up the entire harness like the factory had done. I hooked up the injectors and other sensors. I am still yet to get another A/C compressor to fill that whole I had the upper intake holes punched...

Re: Sy #2811 engine and brakes now with most of it put back together and the bay a spaghetti mess of wires yet to be cleaned up. The stock turbo is just there to fill the hole I have a great friend that researched a good replacement turbo, the Holset HX35, for the 5.9 Cummings diesel. It has...

Re: Sy #2811 engine and brakes Scarring to the cylinder wall forced me to bore out .040 over, a fellow Sy owner informed me the block integrity is questionable bored that far out with 14 psi. The engine builder said that putting a sleeve in it will compensate and meet the strength requirements...

Re: Sy #2811 engine and brakes with the front end off it was time to clean things up before the engine goes back in. Firewall for starters after cleaning and re-under coating the frame here is whats holding the motor in, the solid mounts from RPM inc. the new engine now in its home the...

Re: Sy #2811 engine and brakes After a little work the heads and lower intake now look like this. 2.02 intake / 1.60 exhaust, smoothed out lower intake runners and head intake ports. Painted Dupli-color Storm Gray Met(14 WA391E)