Search results

I am NO good at electrical so if someone could push me in the right direction: My ABS light is on and my scan tool is telling me its code 86 which is a short in the ABS light itself. i have tested all connections at the ABS unit and its getting 12 volts. so whats the easiest way to find the...

My Sy has started a slight stumble at idle. For the heck of it I hooked up a narrow band A/F gauge and I noticed when the stumble happens the A/F gauge goes full lean and the LED startes to fade, almost as if the signal is weakened. Now is this becasue the O2 is going bad or is it becasue of...

Thanks to a fellow board member I finally got the Borla exhaust I have been looking for. So the side cut, 3" exhuast originally fab'ed up by KGB Pilot for Sy 005 is for sale. Bolts up to the cat and to a preexhisting hole along the frame rail. Exits passenger side directly below the 1/4 bed...

I have a strange driveline clunk that I cannot pinpoint. When shifting out of reverse into D the driveline make a single higher pitched clunk before the truck starts rolling forward. Does it almost every time. From what I can tell its coming from the rear end/back end of the driveshaft area...

Thanks to Guy at Rockford Racecraft this is the original factory formula: 1. Light scuff with coarse Scotch Brite and then a Fine Scotch Brite 2. 1 coat of PPG Bumper Clear 3. 2 coats: PPG 1683 Black Base 4. 1-2 coats: PPG BASE Clear 5. 1 coat: PPG 2060 FLEX N FLAT

1st person to PM me name and address can have them. Just pay for shipping to your addy. Brand new K6145T ball joints. Check the moog website to be sure but I think they are for 4wd S10/Blazer etc. Press in kind dont remember if they are upper or lower.

anyone know of the location of a sy in a salvage yard. dont think I am gonna find the ehaust hanger I am in need of on the board. was gonna try and track down a yard with a truck. every one I call in the LA area doesnt even know what a Syclone is. thanks everyone.

The factory hanger toward the end of the bed. the L shaped bracket. willing to pay good money, not blackmail money, but close. anyone have? thanks

Hello all, Thanks to a deal struck with a fellow board member I finally have a original Borla exhaust to almost complete my restoration of Sy 005. However my factory exhaust hangers are long since gone. And I just came from the stealership and their parts diagram is different than the one in...

Is there a gel coat or clear coat on the OEM cladding? I bought a piece off ebay that claims to be OEM. it has the grease pencil marks and the date marks but the finish is not what i expected. the cladding on my truck is all original and not faded. one piece had a scuff and I wanted it...

I have a friend who may be willing to reproduce ALL the factory decals: exterior Syclone logos, GMC on tailgate, the PAS decals on the headliner and inner tailgate, the emissions sticker in the engine bay. gonna try and even get the Goodwrench decal on the drivers side door jam and perhaps the...

I have a friend who may be willing to reproduce ALL the factory decals: exterior Syclone logos, GMC on tailgate, the PAS decals on the headliner and inner tailgate, the emissions sticker in the engine bay. gonna try and even get the Goodwrench decal on the drivers side door jam and perhaps the...

In a hurry I bought a brand new reman ABS unit. Raybestos # ABS 540017. Found out my ABS unit wasnt the problem. So now i have a new unit for sale. Cost me $520+ shipping. I am past my returns window so I am stuck with this thing. Anyone interested? Will accept a REASONABLE offer for...

My Sy has an old school Viper alarm on it. Dont really like it but it does allow we to remote lock my doors. I removed the alarm horn becasue it was in the way of my IC lines and it sounded weak. My question is since I removed the horn would this send a signal to the control box not to fire...

Still cant get the Sy running again after a new dist, wires, cap and rotor. Swaped the new MSD for the old, known working dist. Removed off Drivers side valve cover to confirm TDC by watching the valves, looking at the timing mark and watching the rotor. My timing mark is on the money...

So after finding my distributor rused and a broken cap screw I decided to replace the dist. What a pain in the a$$ that was. ot everything back together but i know I am off on my timing. Started the truck for the 1st time tonight. It stumbles and dies. Rotated the cap clockwise. stays...

Hello all, Bought a set of the custom fit wires that MSD makes for these trucks. Have to say I am not happy. I had Taylor 8mm wires on before. In matching the cylinders up i noticed only 3 of the 7 wires were even the same length. To make matters worse I found the MSD catalog with the...

Autometer Sport Comp Boost/Vac gauge Model 3301 2 1/16" size 30 in.Hg to 30 PSI Mechanical Operation, works perfectly. $35.00 Shipped anywhere to the lower 48 states. Thanks, Paul

Hello everyone, I have some "Spring Cleaning" items: TURBO XS BOV. Type H-RFL. The loudest one they make. In perfect condition. included items: orginal box and instructions, alum. mounting pipe, and adjustment washers. $75.00 shipped. Autometer Ultra Lite Mechanical Full Sweep Oil Temp...

Anyone have the rubber lip that bolts onto the lower CCHE? Will take it off your hands if you do. Thanks