Search results

Re: Truck Wont Stay Running Okay I will try those steps next, another issue I noticed is my PLX wide band gauge is stuck at 14.6, when I turn the truck on, and the rpm's fluctuate but the gauge does not move at all, and before the gauge would get different readings, I think something had to...

Re: Truck Wont Stay Running I disconnected the power from the wide band unit and still same issue starts then dies

Re: Truck Wont Stay Running before the truck shut off i had a malf 13: o2 error

I recently tuned my truck and it has been running perfect, well yesterday I started it up, idled perfectly and took it around the block parked plugged in my ALDL cable while the truck was running, the RPM's revved up to 2K, and then dropped to about 1K, then the engine started stumbling badly...

Re: Typhoon Dyno #'s I think the small stock exhaust housing didnt help at all, was thinking of upgrading it and also removing the catalytic converter, it just seemed like there was just too much back pressure, were gonna do more tuning on the street, since we only had about 3 hours on the dyno...

Re: Typhoon Dyno #'s we were running extremely low timing to keep a safe tune, we had 0 knock :), the truck pulls really hard on the street through all gears im happy with it

I recently tuned my typhoon on a rear wheel dyno here are the numbers: Build Stock block Srp .30 over Eagles 422 cam Stock l35's w/ comp springs, ss stock sized valves, comp 1.6 full roller rockers, hardened pushrods, comp lifters Stock manifolds Cometic head gasket Injectors 50lb Stock...

Im trying to find out if an oil pan and rear main seal are interchangeable between a 91 4.3 block and 95 4.3 balance shaft block, I am missin the 91 block parts