Search results

I have a 91 s-10 blazer body with a syclone drivetrain swapped in. This was supposed to be a project of mine but money is tight and I'm living on my own now, so I am unable to complete this truck. Motor runs good, unsure of real mileage but it pulls very hard. Transmission - I have everything...

Have been in the process of rebuilding my trans and ran into some problems while taking it apart. About 75% of the hard parts are no good and I'm looking at spending a little more than I thought on a rebuild. My friend just got me a 4L60e for $100 that has no reverse but has all forward gears...

Anyone got a pic of the stock turbo with the vacuum lines on it? Truck basically came with a massive vacuum leak.

Well finally got around to taking out the entire drivetrain on my clone and was pleseantly suprised when I pulled the front diff. I knew it was blown cause the previous owner had told me and when I got it what little fluid left was leaking out. All I can say is "WOW". Just look at the pictures...

Well I didn't actually see it but my friend got to look at the whole truck. He works at JDM engineering (not the imports, a mustang tuner www.teamjdm.com) in Freehold NJ and one of the guys he works with owns a syclone. Apparently from what he says it one awesome machine. From what he was told...

http://cgi.ebay.com/ebaymotors/18-New-Black-Corvette-zr1-Camaro-Firebird-wheels-rims_W0QQcmdZViewItemQQcategoryZ43958QQitemZ200094199431 any reason why these rims are so much cheaper compared to other auctions? there almost $200 cheaper than any others on ebay. I'm lookin to pick up a set of...

Does anyone do custom tuning in NJ/PA/NY/DE area for our trucks?

Well after 3 months of trying to get a hold of George to purchase his 700 kit with no answer or reply, I have given up that it will ever happen. This has seriously put a damper on my build as my truck could already have been finished and running at atco for the spring test and tune dates to work...

anyone got any pics of sytys with chrome/gunmetal/black/standard finish ZR1s?

does anyone have the pic of ed hess doin the AWD burnout at atco? you can post any pic related to this if anyone has any others

Lately I have been curious as to if anyone has run this turbo, or any other gnash turbo on a syty. My friend is building up his 87 grand national and hes sellin his old turbo to me for 150. For the money its hard to beat, Its considerably larger than our stock turbo at 800cfm compared to the...

So I finally got around to getting some photos of my truck online so I figured I'd share them. Waxed her up and she looked pretty good but the previous owner kinda ruined the paint which you cant see in the photos. Regardless, enjoy. Front shot Side shot Back kinda

Can you still pass emissions after you delete the EGR? I'm tryin to keep my truck on the street with my build but want the EGR gone. Anyone have any input?

I've been thinkin about doing a new cam along with the vortec heads. I havent seen much except for a crane and lunati one, is there any one in perticular that people run for a mild build and have had sucess? What about springs, pushrods, rockers, etc. just lookin for some input. I plan on doin...

I'm about to do a background check on the S10 to see what the deal with it is and I was wondering where (if it does) it would say the vin or anything on the engine to identify what truck this engine came out of. If it doesn't then oh well, just curious. Thanks

Alright so I finally think I've got stage one all figured out, and I would like some imput as to what you guys think of this setup and/or anything I should add or change. So here goes- Engine - intake, some good plugs/wires, walbro 242 or 255, STG ultimate stocker, 180 thermostat, L35 heads...

So I happened to stumble across this 4L80e out of a 95 6.5 2500 pickup, very VERY cheap and supposedly it was working flawlessly when it was in. are all the 4L80e's the same? I was going to rebuild the 700 but this seems to make more sense, George how much is just the conversion parts and will...

I'm searchin for a stocker right now, but has anyone run one from a cobra one before? besides having to fab it to get it to fit, its slim and its cheap...

If I have a normal S10 700r4, can I rebuild it with syty parts? Say leave the gearing but put in the clutches, valve body and all that stuff? I would Imagine its not that different.

Hey quick question, I'm pullin the front diff so I can rebuild the sucka and I got every bolt off except for the top drivers side bolt that runs into the frame. I could get the whole bolt and nut to spin but the nut is seized on there. Since theres a lack of room, how do you get in there and get...